SN74AUC16374DGVR Integrated Circuits (ICs)

Max Propagation Delay @ V, Max CL:	2.2ns @ 2.5V, 30pF
Base Part Number:	74AUC16374
Package / Case:	48-TFSOP (0.173", 4.40mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 85°C (TA)
Input Capacitance:	3pF
Current - Quiescent (Iq):	20µA
Voltage - Supply:	0.8 V ~ 2.7 V
Current - Output High, Low:	9mA, 9mA
Trigger Type:	Positive Edge
Series:	74AUC
Clock Frequency:	250MHz
Number of Bits per Element:	8
Number of Elements:	2
Output Type:	Tri-State, Non-Inverted
Type:	D-Type
Function:	Standard
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction:

SN74AUC16374DGVR is part of Texas Instruments’ series of logic integrated circuits. This logic IC that falls within the family of Flip Flops can provide the best combination of performance, size and cost for logic applications. The SN74AUC16374DGVR has two main operating modes, the Address Latch Mode (ALM) and the Flip Flop Mode. In the ALM the output changes when a clock transition occurs, or when the output passes through a certain number of clock cycles, whereas in the Flip Flop Mode the output changes only when a clock transition occurs.

Application Field:

The SN74AUC16374DGVR can be used for a wide range of applications. The most common are in digital clock circuits, waveform generators, frequency dividers, and digital multiplexers. It is an ideal choice for applications that require high-speed switching and general logic operations.For example, the SN74AUC16374DGVR can be used in waveform generators to generate periodic waveforms such as sine waves, triangular waves, rectangular waves, and sawtooth waves. The Serial/Parallel Interface allows the waveform generator to be connected to other digital systems, such as computers and counters.The SN74AUC16374DGVR can also be utilized in clock circuits to accurately measure time or create frequency dividers. By dividing the clock’s input frequency by a certain number, the output frequency will be reduced. This is often used in a variety of digital systems in order to synchronize the data flow.Lastly, the SN74AUC16374DGVR can be used in digital multiplexers to selectively route one or more digital signals to an output. By activating the appropriate input signals, the multiplexer can route the signal to the desired output.

Working Principle:

The SN74AUC16374DGVR utilizes a flip-flop circuit principle to switch its outputs. It contains a number of flip-flops or “latches”, each of which contains two data-holding registers called “Q” and “Q”. When a logic input signal is applied to the latch, the contents of the “Q” register are transferred to the “Q” register. The output of the flip-flop then changes to reflect the state of the “Q” register. The latch is reset to its initial “low” state once the signal is removed.The SN74AUC16374DGVR also contains a memory device to store data. This feature allows the IC to continuously store information while the input signal is being applied. That way, the output of the flip-flop will remain in the same logic state even after the input signal is removed.The design of the SN74AUC16374DGVR is based on a global knowledge base that provides superior performance over other logic ICs. It can achieve high-speed switching of logic signals over a wide voltage range, while consuming little energy.

Conclusion:

The SN74AUC16374DGVR from Texas Instruments is a flexible logic IC that can be used for a wide variety of applications. This device is based on the global knowledge base, which provides superior performance and energy efficiency over other logic devices. It can also be used for digital clock circuits, waveform generators, frequency dividers, and digital multiplexers. Its flip-flop circuit principle ensures reliable operation in these applications, and its memory device allows the IC to store data even after the input is removed.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description