SN74AUP3G34YFPR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74AUP3G34YFPR is a low-voltage single-channel 2-bit FET bus switch designed with a logic level translation solution to isolate up to 4 independent high speed logic signals between two different logic families. The device can be used as a simple on/off switch to isolate signals between devices with different logic levels, or as a level translator to convert the signal level to the desired logic family.

The SN74AUP3G34YFPR is classified as part of the Logic–Buffers, Drivers, Receivers, Transceivers category. Designed primarily as a level translator, it can also be used as a bus switch to isolate signals, allowing data to be transferred among devices with different logic families. It is designed to improve the signal integrity by reducing the voltage droop and ensuring a level logic signal at a lower supply voltage. With a low-voltage range of 0.9V to 3.3V, it operates in a temperature range of -40°C to 85°C for improved performance.

The SN74AUP3G34YFPR operates using a non-inverting Buffer logic, which is a logic family that rapidly switches between high and low voltage levels. It sends out a constant known signal without any propagation delay and it does not require clock signals. The device can be configured to operate in both single and dual control modes, allowing different types of control signals to be sent out simultaneously. In single control mode, the control signal can be sent out from either the Enable pin or the Inhibit pin, while in dual control mode theEnable and Inhibit pins can be used to send out separate control signals.

The SN74AUP3G34YFPR has a wide range of applications. It can be used as an isolator switch between devices that use different logic families and can also be used to level-shift the voltage levels of signals being sent between different devices. It is also useful for signal buffering and for driving high resistance lines to improve signal integrity. In addition, it is an ideal choice for data communication, signal routing, signal buffering, voltage-level translation and AS-tri-state logic applications.

The SN74AUP3G34YFPR is a low-voltage single-channel 2-bit FET bus switch designed to be used as a level translator and as a bus switch to isolate signals. It is designed to operate using a non-inverting buffer logic, which enables rapid switching between high and low voltage levels with no propagation delay. With its wide range of applications, the SN74AUP3G34YFPR is an ideal choice for data communication, signal routing, signal buffering, voltage-level translation and AS-tri-state logic applications.

The specific data is subject to PDF, and the above content is for reference