SN74BCT244DBRE4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74BCT244DBRE4 Logic IC is used for a variety of tasks in almost every digital circuit. This highly reliable logic buffer is often used in communicating data between systems, such as between a computer and its peripherals. As an FET bus transceiver, the SN74BCT244DBRE4 is able to provide the necessary logic between different circuits.

The SN74BCT244DBRE4 is a low power, single-supply, high-speed non-inverting bi-directional bus transceiver. The device has two data channels and each channel is controlled via two independent control inputs (DIR1 and DIR2). The active high chip select (CS) input can be used to put the device into the low-power mode. The two inputs (DIR1, DIR2) can be used to select the particular output to be in the high or low impedance state.

The SN74BCT244DBRE4 is a CMOS device with a power supply voltage range from 1.5V to 3.3V. It features low power consumption and can operate at a maximum speed of 200MHz. The device features a low quiescent current of 3.2mA, which allows it to be operated in a power-sensitive environment.

The SN74BCT244DBRE4 has an output voltage range for both the low and high state of 0V to VCC. This output depends on the supply voltage and the load on the device. The device also has two outputs (DIR1, DIR2) that can be used to control the output states of the I/O pins. The device has a nominal rate of switching of 1.92A and a propagation delay of 2.5ns at 3.3V.

The SN74BCT244DBRE4 is highly versatile and can be used in almost any type of digital circuit. It can be used for bi-directional buffering, data transfer and other communication systems. It is also used to buffer large amounts of data to prevent overloading the system’s input/output channels. The SN74BCT244DBRE4 is useful in applications that require high-speed data transfer, such as in digital video recorders, digital cameras and various communication systems.

To better understand the functionality of the SN74BCT244DBRE4, it\'s useful to look at the working principle of the device. At a high level, the SN74BCT244DBRE4 is a Multi-Input/Output (MIO) device that can be directed by two control inputs (DIR1, DIR2) during operation. The DIR1/DIR2 inputs are used to select the particular output to be in the high or low impedance state. When the DIR1/DIR2 is LOW, the respective output is in the high impedance state or open drain state.

The DIR1/DIR2 is also used to control the data flow direction for each channel. Depending on the settings of the DIR1/DIR2 inputs, the device can either transmit data from one channel to the other, or receive data from one channel to the other. For example, if the SN74BCT244DBRE4 is configured as an FET bus transceiver, the DIR1/DIR2 inputs can be used to enable the data flow in either direction depending on the application. The device can also be configured as a Bi-Directional Buffer, in which case the inputs are used to select the direction in which the data should flow.

The SN74BCT244DBRE4 also features a power-down logic, whereby the CS pin must be kept high in order for the device to be in the active state. When the CS pin is low, the device will be in the low-power state. This logic makes the SN74BCT244DBRE4 suitable for power sensitive applications.

In summary, the SN74BCT244DBRE4 is a low power, single-supply, high-speed non-inverting bi-directional bus transceiver. It has outputs which can sink or source up to 1.9A and is capable of operating at a maximum speed of 200MHz. It can be used for buffering data, transferring data between systems, and in various digital circuit applications.

The specific data is subject to PDF, and the above content is for reference