SN74BCT373DBRG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74BCT373DBRG4 is a hex latch with tri-state outputs that is used primarily to store binary data or other digital information in an integrated circuit (IC). It belongs to a class of logic components called latches, which are used to hold or store data in an IC circuit. These latches are typically used in applications such as analog-to-digital converters, waveform generation, data transmission, and bus control. This product is manufactured by Texas Instruments, a leading producer of integrated circuits.

A latch is a digital storage element that stores a binary data bit. The binary data is taken from the input line and stored when the enable line is asserted. Once the enable line is de-asserted, the data bit remains stored until the enable line is asserted once again. Latches can be used to store single bits of data, multiple bits of data, bytes, and words.

The SN74BCT373DBRG4 is a hex latch with tri-state outputs. Hex indicates that the latch consists of six Flip-Flop circuits, which are logic circuits that can store and retrieve binary data. Each of these Flip-Flops consists of two inputs, a set and a reset, and outputs a single bit of data. The tri-state output indicates that the latch also contains a logic buffer, which acts as an amplifier or driver to provide a stronger output signal. The tri-state output can be enabled or disabled, allowing the device to slow down the data transmission rate.

The SN74BCT373DBRG4 has two control inputs and six data outputs. The control inputs are the enable and reset signals. The enable signal is used to write data into the latch, while the reset signal is used to clear the data to a known state. The device has an input resistance of 350 Ohms, an output resistance of 25 Ohms, and a switch-off resistance of about 0.82 Ohms. The voltage levels for the device are TTL and the supply voltage range is 4.5V to 15V.

In operation, the SN74BCT373DBRG4 circuit acts as a data storage and retrieval device. Data is written into the circuit when the enable line is asserted. Once written, the data remains stored until the enable signal is de-asserted and the reset signal is used to clear the latch. Data stored in the latch can be retrieved and read out via the six data outputs.

The SN74BCT373DBRG4 is an ideal solution for applications that require data to be stored for a period of time. Examples include analog-to-digital converters, waveform generation, data transmission, and bus control. Its high speed, low power consumption and compact design also make it a great choice for automotive and consumer electronics applications.

The SN74BCT373DBRG4 is an excellent example of a latch, a type of digital storage device that can be used to store and retrieve data. Its high speed, low power consumption, and compact design make it the perfect choice for many applications. When used in the right situation, it can provide great storage and retrieval capabilities for a variety of applications.

The specific data is subject to PDF, and the above content is for reference