SN74BCT760N

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Integrated circuits are widely used in almost all contemporary electronic products. The SN74BCT760N device is an example of one such integrated circuit that performs certain functions. It belongs to a class of Integrated Circuits known as the ‘Logic – Buffers, Drivers, Receivers, Transceivers’. This class of integrated circuits is responsible for the generation and transfer of digital logic signals.

The SN74BCT760N is an 8-bit bidirectional transceiver that uses non-inverting 3-state outputs to interface two data buses. It is used to interface two bidirectional buses that require a high drive capacity, such as a system bus. These buses can be driven at low, medium, and high speeds. The SN74BCT760N is not suitable for applications that require increasing data rates such as clock and strobe signals.

The SN74BCT760N device is part of Texas Instruments’ Widebus System Logic family and is used to convert TTL levels to High-Speed CMOS levels. Its operating voltage is between 4.5 V to 5.5 V, and the power dissipation is 0.8 W. It has eight 3-state non-inverting outputs, and eight active-high TTL compatible inputs. It is available as either a 14-pin DIP or 28-pin PLCC package.

The working principle of the SN74BCT760N integrated circuit can be divided into two separate operations, namely the Read and Write cycle.

The Read cycle is the process wherein the data from the bus that is to be read is placed on the SN74BCT760N’s output pins. Here, the control pins, OE, and CE, are set low before the data is read. The OE pin is the ‘Output Enable’ pin and ensures that the outputs stay in the high-impedance state until the proper logic levels are established. The CE pin is the ‘Chip Enable’ pin and is used to set a delay between the read cycle and when the actual data is presented on the output pins.

The Write cycles are similarly divided into two stages, namely the ‘Pre-Write’ and ‘Data Write’ steps. During the ‘Pre-Write’ step, the OE and CE pins are set to low while the I(E), WE, and A(E) pins are set high. I(E) is the High-to-Low Enable Pin and A(E) is the Low-to-High Enable Pin. The \'WE\' is the Write Enable Pin which is kept in a High logic state. During the ‘Data Write’ step, the data that is to be written is presented on the inputs of the circuit along with the corresponding high/low enable signals. Once these signals are set, the Write Enable pin is set high to write the data onto the output pins.

The SN74BCT760N integrated circuit can be used for a wide variety of applications, such as buffering and line driving. It is also used for the generation of address and control signals in microprocessors and as an interface between two buses. The SN74BCT760N is one of the most popular and widely used transceivers in the market, and its applications range from industrial to consumer electronics.

The specific data is subject to PDF, and the above content is for reference