SN74CBTD3384DGVR

Series:	74CBTD
Packaging:	Tape & Reel (TR)
Part Status:	Active
Type:	Bus Switch
Circuit:	5 x 1:1
Independent Circuits:	2
Current - Output High, Low:	--
Voltage Supply Source:	Single Supply
Voltage - Supply:	4.5 V ~ 5.5 V
Operating Temperature:	-40°C ~ 85°C
Mounting Type:	Surface Mount
Package / Case:	24-TFSOP (0.173", 4.40mm Width)
Supplier Device Package:	24-TVSOP
Base Part Number:	74CBTD3384

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SN74CBTD3384DGVR Overview

The SN74CBTD3384DGVR is an exceptionally popular device in the world of logic - signal switches, multiplexers, and decoders. This device is a 2.7V to 5.5V logic device with eight independent buffers/drivers with 3-State outputs. It acts as a interface between devices operating at different voltage levels, as well as allowing the use of multiple devices on a bus.

SN74CBTD3384DGVR Application Fields

One of the main applications of SN74CBTD3384DGVR devices is interfacing computer peripherals with a microprocessor system. SN74CBTD3384DGVR devices are used to provide buffering for data and address lines, allowing them to operate at different speed and voltage levels. The device also allows for the use of multiple devices on the same bus, since the outputs can be placed in the high impedance state, ensuring that two devices do not interfere with each other.The SN74CBTD3384DGVR device is also commonly used in consumer electronics, where it is utilized for data and address signals. Its applications can be seen in televisions, stereos, CD players, radio receivers, and other consumer products.

SN74CBTD3384DGVR Working Principle

The SN74CBTD3384DGVR is an 8-bit bidirectional device. It contains eight independent inputs and eight outputs. It also contains two selection inputs, which allow the user to choose which inputs to connect to which outputs.The SN74CBTD3384DGVR can be put into one of three states; Active, High Impedance, or Disabled. The Active state is the default state, when the device is enabled. The High Impedance state acts as an “off” state, in which the device is not driving the outputs. This allows other devices to be connected on the same bus, as the SN74CBTD3384DGVR serves to disconnect the outputs from the bus. The Disabled state is similar to the High Impedance state, except the outputs are not only disconnected from the bus, but also from the inputs.When working at 3.3V, the SN74CBTD3384DGVR has a low-power operation current of 4.2 mA. Its active logic power consumption is negligible (1-30 µA) and it is impedance matched with 50Ω termination resistors.The SN74CBTD3384DGVR is designed with a wide common-mode input voltage range, ensuring a high level of noise immunity. It is also designed to provide a high level of ESD protection, as well as protecting the outputs from voltage or current overloads.

Conclusion

The SN74CBTD3384DGVR is an incredibly versatile and powerful device in the world of logic - signal switches, multiplexers, and decoders. It is a 2.7V to 5.5V logic device with eight independent buffers/drivers with 3-State outputs, allowing for a wide range of applications. Its versatility, power, and reliability make it an ideal choice for a variety of different applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description