SN74CBTS3384DWR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

As the world continues to become more and more connected, the need for signals to be communicated between systems is becoming increasingly important. Logic-signal switches, multiplexers, decoders, and SN74CBTS3384DWR are all essential in this regard, providing a reliable and secure means for exchanging data. This article will provide a brief overview of the SN74CBTS3384DWR and its application, as well as an explanation of its working principle.

The SN74CBTS3384DWR is a dual 4-bit universal shift/storage register with 4-bit addressable internal memory. It is designed to latch and store data and then quickly retrieve it at a later time. This makes it highly useful in applications such as programmable logic controllers, embedded processors, and instrumentation systems. The SN74CBTS3384DWR is designed to operate over a voltage range of 2.7 V to 5.5 V, and can be powered down to further reduce power requirements.

The SN74CBTS3384DWR can be used to provide 4-bit parallel shift/storage. It allows data to be inputted serially and shifted rightward into the register, and then stored for later retrieval. An address counter and comparator can be used to address a specific memory location and then retrieve data from it. The SN74CBTS3384DWR is a general-purposeShift/Storage register, and can be used in a wide variety of applications.

The primary function of the SN74CBTS3384DWR is to provide data storage, shifting, and retrieval. The SN74CBTS3384DWR contains latches, which can be used to store and quickly retrieve data. The latches hold their data until the device is powered down.

The SN74CBTS3384DWR is powered by a single, 3.3 V power supply. The power is used to power the register and enable the on-chip logic. The SN74CBTS3384DWR also contains an enable pin, which can be used to enable or disable the device. When enabled, the device will operate normally. When disabled, the device’s registers and latches will not be affected.

The SN74CBTS3384DWR provides four different modes of operation, each of which is designed to operate in different settings. The two primary modes are shift mode and store mode. In shift mode, data is inputted serially and shifted to the right side of the register. In store mode, data is writen to internal memory. Additionally, the SN74CBTS3384DWR can also operate in parallel mode and addressable mode. In parallel mode, data is inputted and outputted in parallel. In addressable mode, an address counter and comparator is used to target a specific memory location and read from it.

Finally, the SN74CBTS3384DWR contains an optional parity checker, which can be used to ensure the integrity of data in the register. The parity checker works by making sure that the number of ones in the data matches the number of zeros. If a discrepancy is found, then an error is reported.

In summary, the SN74CBTS3384DWR is a dual 4-bit universal shift/storage register with 4-bit addressable internal memory. It is designed to latch and store data and then quickly retrieve it at a later time. Its primary function is to provide data storage, shifting, and retrieval. It contains latches, an enable pin, and an optional parity checker. The SN74CBTS3384DWR can operate in four different modes and is designed to operate over a voltage range of 2.7 V to 5.5 V. It can be used in applications such as programmable logic controllers, embedded processors, and instrumentation systems.

The specific data is subject to PDF, and the above content is for reference