SN74CBTS6800DWRG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74CBTS6800DWRG4 is a logic device from Texas Instruments\' Advanced Low-Voltage Logic platform, and it is one of the most effective ways to switch, multiplex, and decode signals. This logic device is able to provide true flexibility in low voltage, digital applications, and it is the preferred choice for many professionals. It provides digital-only operation for maximum performance and versatility.

The SN74CBTS6800DWRG4 is a dual-channel multiplexer and decoder with two identical 16-bit ports. It is designed to allow two 8-bit bus signals to flow into one 16-bit output. Each port has four active-low enable input pins to make sure only valid inputs are accepted. The output of each channel is controlled by an active-low enable pin. An invert strobe pin is also provided to allow single-bit-inverse operation. The SN74CBTS6800DWRG4 runs on low voltage, low power, and has a range of power supply options.

The SN74CBTS6800DWRG4 is commonly used in digital circuits as a multiplexer and/or decoder. Its 16-bit wide bus capability means it can be used to switch between different buses, from 8 to 16 bits, both on the input and output side. It supports multiple I/O formats, including single-ended, pseudo-differential and LVDS (Low-Voltage Differential Signaling) for low-noise operation when working with sensitive equipment such as Closed-Circuit Television (CCTV) receivers and transmitters.

The SN74CBTS6800DWRG4 can also be used as a multiplexer in communications. For example, it can be used to switch between different fiber-optic channels, allowing signals on different frequencies to be used without affecting each other. Additionally, the SN74CBTS6800DWRG4 can be used to switch or multiplex two Ethernet channels together. This allows the data rate to be doubled, while minimizing cable and switch complexity.

The SN74CBTS6800DWRG4 can also be utilized as a decoder in digital logic circuits. It can be used to decode bus signals, allowing information from multiple addresses to be received from a single source. With its built-in enable/disable and invert strobe functions, it is easy to enable and disable individual lines to provide the most efficient decodation process. It makes it possible to connect multiple digital devices on the same line for low cost, low power operation.

The SN74CBTS6800DWRG4 has been around for more than twenty years since it was first released in 1996, and it is still one of the best logic devices around. Its capability as a multiplexer and decoder, combined with its ability to handle a wide range of data formats, make it ideally suited for many digital applications. It is one of the most popular switching, multiplexing, and decoding solutions available, and it is an essential part of any toolkit for digital signal processing and communications.

The specific data is subject to PDF, and the above content is for reference