SN74F126DG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74F126DG4 is classified under the Logic – Buffers, Drivers, Receivers, Transceivers as it was designed to provide numerous drivers and receivers applications. This chip offers two general-purpose bidirectional 3-state buffers and is based on an advanced CMOS technology. It provides compatibility with TTL logic levels, improved AC performance and CMOS input levels, allowing it to be used in a wide range of applications.

A buffer is a circuit device that isolates one part of an electric system from another part. It provides noise immunity, correct logic levels and has a very high impedance output. This allows it to transfer its input to its output intact while blocking any changes in the output from affecting the input. The SN74F126DG4 has two independent buffers, or isolators, that make it rarely used in applications.

The SN74F126DG4 is ideally suited for high-speed logic applications thanks to its 10 MHz switching. The input buffer ensures proper logic levels (from VCC= 2.7V to 6V) while the output driver enables high-current outputs (up to 20 mA). It has two independent “Single” and “Tri-state” outputs with a low impedance of 285 (ohms max) in PNP-structure and 425 (ohms max) in NPN-structure.

The SN74F126DG4’s wide application field includes data transmission, signal processing, level shifting, and transmission of signals. It also has AC and power management functions, such as signal buffering, level shifting, and switch control. It is also used in multiple applications like 6 to 10 V level shifting, LED drivers, and CMOS AND/OR gates. The SN74F126DG4 is also suitable for logic systems programming, industrial inverters, and various logic interface communication systems.

The work principle of the SN74F126DG4 is basically the same as other logic devices. When this device receivesthe truth table information, it sends the control signal to its input and generates the output as required. It has two independent buffer elements, so it can process two separate circuit functions at the same time. It can also be tested with a logic probe before and after installation to guarantee correct operation.

At a more specific level, when an input signal is received, the SN74F126DG4 will check whether the signal is stable or not. If the signal is higher than VIL, then it will be judged as a high level, and if not, then it will be treated as a low level. In addition, it also has a pair of inputs to implement the control signals for both single and Tri-state outputs. When the Tri-State enable signal is “on,” the SN74F126DG4 will output the corresponding logic level; when it is “off,” the outputs will be disabled.

In conclusion, the SN74F126DG4 is a reliable and power-saving tool for buffer applications. Its high speed makes it suitable for data transmission, signal processing, and level shifting applications. These are all accompanied with balanced current characteristics and fast, stable switching. Furthermore, its all-purpose input buffer and efficient output driver make it suitable for multiple environments.

The specific data is subject to PDF, and the above content is for reference