SN74FB2033ARC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74FB2033ARC, a dual 4-bit edge-triggered static latch, is a device in the Specialty Logic Logic family. It can be used to store two 4-bit binary words. The SN74FB2033ARC provides an economical solution for applications requiring data storage, signal isolation, signal inverting, and level shifting. This device is well suited for address and data latches, signal multiplexers and demultiplexers, signal inverters, signal isolators, data storage, or as part of larger designs for multiplexing 4-bit nibbles.

The SN74FB2033ARC is an 8-bit static latch configuration consisting of two, 4-bit latches operating from a common Clock Input. The Latches can be accessed either as one 8-bit latch or as two independent latches. Separate Clock Inputs provided for each latch facilitates independent operation of each portion of the SN74FB2033ARC.

The SN74FB2033ARC also incorporates output hold circuitry and level-shifting circuitry. The output hold circuitry is configured to allow the outputs of the latch to remain static while the logic level of the Clock Input is High. The level-shifting circuitry allows the input and output levels of each 4-bit latch to be compatible with either 3.3V or 5.0V logic families. The level-shifting circuit supports both TTL and CMOS logic families.

The SN74FB2033ARC employs a set of eight master-slave flip flops to even out distortions caused by metastability. The metastable flip-flops are prevented from entering a metastable state by locking the output of each flip flop to a LOW logic level to release the metastable state until the state of the flip-flop is determined.

The SN74FB2033ARC supports two different modes of operation. The first is the active-low Reset mode, which resets all of the outputs on a LOW Reset signal. This mode would be selected if a HIGH logic level were required to enable the latch when enabling is requested. The second mode is an active-high Set mode, which sets all of the outputs on a HIGH Set signal. This mode would be selected if a LOW logic level were required to enable the latch.

The SN74FB2033ARC requires two supply voltages, a low voltage supply and a high voltage supply. The Low Voltage supply is the logic supply, which supplies the logic levels (3.3V or 5V) required to drive the logic in the SN74FB2033ARC. The High Voltage supply is the power supply, which supplies the power that the SN74FB2033ARC needs to function properly.

The SN74FB2033ARC handles data storage in multiple ways. It can store 8-bit words in either one-shot or latch mode. The data can be loaded into the latches in either parallel or serial mode. The data is retained in the latches until it is replaced or the reset pin is activated.

The SN74FB2033ARC has many advantages over traditional static latches, such as simpler circuit design, improved system performance, and low power operation. It is capable of operating at supply voltages as low as 3.3V and as high as 5V. It also eliminates the need for external pull-ups and pull-downs, as the internally generated signals are used instead. The SN74FB2033ARC also eliminates switching noise, which can cause glitches in the system. Finally, this device is extremely versatile and can be used in a wide range of applications, such as address and data latches, signal multiplexers and demultiplexers, signal inverters, as part of larger designs for multiplexing 4-bit nibbles, and more.

The SN74FB2033ARC is an ideal choice for applications requiring data storage, signal isolation, signal inverting, and level shifting. Its two supply voltages, low power operation, and versatility make it extremely suitable for a diverse range of applications. It is a valuable addition to the Specialty Logic family of Logic devices and is a highly reliable and cost-effective choice.

The specific data is subject to PDF, and the above content is for reference