SN74GTLPH306PW

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74GTLPH306PW is a single supply, non-inverting level translator that is used to interface between low voltage (1.2V-1.95V), low power (1.8V) and higher voltage (2.5V-3.6V) ICs. Its purpose is to provide a voltage level shift from one voltage domain to another with no additional logic. This device is used in various applications such as portable electronics, automotive, and consumer applications.

The SN74GTLPH306PW is a six-channel level translator. Each channel has a separate input, output and an enable pin. The enable pin can be used for bidirectional translation and it can also be used to isolate certain channels or to disable parts of the circuit. The device has no direction control input, so it cannot be used in unidirectional applications. The device has an output-enable input that allows it to be used as a level translator device or as a bus-powered switch.

The SN74GTLPH306PW has several features including an active internal clamping diodes, a power-on reset, and an output-enable pin. The internal clamping diodes act as a protection for devices that are connected to the input or output of the device. The power-on reset ensures that the outputs of the device reset properly when power is applied. The output-enable input allows the device to be used as either a level translator or as a bus-powered switch.

In order to use the SN74GTLPH306PW, the input and output signals must be properly configured. The input and output signals can be either logic low (0V) or logic high (Vcc). For example, if a logic high (Vcc) is applied to one of the inputs, a logic low (0V) should be applied to the other input. When this is done, the output will be driven to a logic high (Vcc). The SN74GTLPH306PW can be used as a bidirectional level translator by placing the enable pin in the high-logic state.

The SN74GTLPH306PW can be used in applications such as optical networking, automotive, point of sale, and portable devices. In optical networking, the device is used to interface between low-voltage, low-power devices and higher voltage applications. In automotive applications, the device is used to two-way transceiver and impulse applications. In point of sale applications, the device is used to interface between two systems with different voltage requirements. Finally, in portable devices, the device is used to provide voltage level shifting between USB or serial data lines.

The SN74GTLPH306PW is a device that is designed to provide a simple and cost-effective way to interface between low and higher voltage applications. Its active internal clamping diodes and power-on reset, as well as its output enable pin all make it a viable choice for a variety of applications, such as optical networking, automotive, point of sale, and portable device. The device features a low-noise operation and its bidirectional translation allows it to be used in both unidirectional and bi-directional applications.

The specific data is subject to PDF, and the above content is for reference