SN74HC153PWG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Signal switches, multiplexers, and decoders are essential components in the design of complex analog and digital circuits. One such device is the SN74HC153PWG4, which is a dual 2-to-4 line multiplexer/demultiplexer. This device is designed to switch between two data signals and provide a four-bit output. It is typically used as a multiplexer to combine two data signals into one, or as a demultiplexer to separate one signal into two.

The SN74HC153PWG4 is an integrated circuit (IC) that contains two 2-to-4 line multiplexers/demultiplexers in a single package. It is composed of two 4-bit multiplexer/demultiplexer circuits that each use two binary control signals – select A and select B – to select one-of-four data sources in either the multiplexer or demultiplexer configuration. The device is configured in multiplexer mode when select A and select B are both high. In this mode, input ports A and B are connected to output port Y according to the control signals. In the demultiplexer configuration, input X is connected to output ports A and B according to the control signals.

The SN74HC153PWG4 has many uses in a variety of applications. It is often used as a bridge in an Audio/Video signal routing system, allowing a signal from one source to be routed to multiple destinations. It can also be used in data communications, allowing two data signals to be combined into one signal. Additionally, it is useful in logic circuit designs, providing the functionality of a multiplexer or demultiplexer with fewer components. In digital signal processing, the SN74HC153PWG4 can be used as a multiplexer or demultiplexer in the circuit of an image sensor.

The SN74HC153PWG4 works on logic level signals, meaning that the input and output are either on or off. This is accomplished by using transistors, resistors, and capacitors. The two select signals control which data is sent to the output. When one of the select signals is high, the associated input data is sent to the output port and the other input is ignored. This can be demonstrated with the following truth table:

• Select A Select B Output
• 0 0 A
• 0 1 B
• 1 0 A
• 1 1 B

It can also be operated in a "pass-through" mode, meaning that the input and output signals are the same. This is accomplished by setting both select signals to 0. It is also possible to configure the SN74HC153PWG4 as a 2-to-1 multiplexer or demultiplexer by grounding either select A or select B.

In addition to its versatility, the SN74HC153PWG4 is designed to operate over a wide range of temperatures, making it suitable for use in extreme temperature environments. Additionally, it features an input protection circuit that prevents data loss due to static discharge. The IC is also tolerant to asynchronous control signals, meaning that data will not be lost even if the select signals are changed before the data has been fully sent.

The SN74HC153PWG4 is a versatile and robust IC that is well-suited for many applications. Its ability to combine multiple signals into one signal, separate a single signal into two signals, and tolerate wide temperature ranges makes it an excellent choice for logic circuit designs. Furthermore, its robust input protection and asynchronous signal compatibility make it a reliable choice in digital signal processing applications.

The specific data is subject to PDF, and the above content is for reference