SN74HC193PW

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74HC193PW is a 4-bit synchronous UP/DOWN binary counter with positive edge-triggering, synchronous parallel load, up/down carry flag and output carry flag, and has a wide range of applications. This IC is available in the ultra-low-power (ULP) consumption mode and operates on a wide supply voltage range of 1.0V to 5.5V, making it ideal for use in portable and battery-powered applications. It is designed to meet the requirements of a number of different applications, including logic circuits, instrumentation, high-speed logic, communication systems, and high-speed memory logic.

The SN74HC193PW is a 4-bit synchronous up-down counter that counts in two directions: up count (A) or down count (B). All its inputs are the same, but the direction in which the count changes depends on the direction control input. It has a parallel load input for asynchronous loading, a true parallel load output for synchronous loading, and an output carry flag to indicate the state of the last bit. It also has a reset input to set all the states to zero. The logic diagram of the counter is shown below:

The working of the SN74HC193PW is quite simple. When a positive edge is detected on the clock input C, the counter will increment (A) or decrement (B) depending on the direction control input. The value of the counter is determined by the input data (A-D), and will change upon the next positive edge of the clock input (C). The direction control input DIR will select a direction for the counter to count. Similarly, the parallel load input PL will allow the data inputs (A-D) to be set to a new value only when it is set to High. It is important to note that for serial operations, the parallel load input PL will be low, and for parallel operations, the data inputs A-D will be equal. The reset input R is used to reset the counter to all zeroes, regardless of the direction control input.

The SN74HC193PW is suitable for a wide range of applications, including frequency counters, counter/timer and data acquisition systems, digital clocks and timers, embedded control systems and many other digital logic applications. It is also widely used in microcontroller-based systems because of its wide range of features and power consumption. Its power consumption can be further optimized by operating it in ULP mode, which allows it to conserve power and reduce switching noise.

In summary, the SN74HC193PW is a 4-bit synchronous counter with strong edge triggering and synchronous parallel loading capabilities. It is widely utilized in a wide range of applications due to its robust design and low power consumption. It is an ideal solution for various digital logic applications, such as frequency counters and embedded control systems.

The specific data is subject to PDF, and the above content is for reference