SN74HC245DWG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SN74HC245DWG4 is a type of logic-buffers, drivers, receivers, transceivers from Texas Instruments. It belongs to the family of high speed integrated circuit logic (HC logic), which combines CMOS logic levels and drive capabilities with TTL logic level switching. It has a wide operating voltage range of 2V to 6V and maximum output current capability of up to 24mA. Because of its low power consumption, SN74HC245DWG4 can be used in circuits with varying power supplies like battery-powered applications, and is also ideal for such applications due to its ability to switch quickly.

The SN74HC245DWG4 is available in two packages, SOIC and TSSOP, with 20 pins each. The four circuits per package offer the same features but with different pin layouts. In each package, the switch’s functions are clearly labeled, making it easy to identify the input and output. The terminals have an additional dielectric surface for a higher operational temperature, allowing for increased reliability. The device has an open drain output, driven by a N-channel MOSFET, which allows high-speed and low capacitance switching.

The main feature of the SN74HC245DWG4 is its ability to multiplex and demultiplex bidirectional data. It can switch digital signals between two sets of buses, and its maximum switching speed is 16 MHz. This device contains all types of logic including, AND, OR, NAND, NOR and XOR, making it suitable for a wide range of applications.

The device contains 4-bit buffers and 4-bit transceivers. A buffer is a passive electronic device that can amplify, delay or filter an incoming signal. It acts as a voltage comparator that can boost, reduce or suppress a signal’s power. In contrast, a transceiver is a device that can both transmit and receive data. It is commonly used for communication between two systems.

To make the SN74HC245DWG4 work, it needs to be connected to both input and output logic signals. The power must also be connected, either to VCC or to GND. The enable inputs can be set to either active high (A) or active low (B). The logic inputs can be set to either high or low, depending on the logic function required. The logic control of each output is determined by the logic level of the enable input and the logic input.

The SN74HC245DWG4 is a versatile device and can be used in a wide range of applications, such as communication interface, data transfer, signal conversion, signal conditioning, signal multiplexing and demultiplexing, signal routing and signal monitoring. It can also be used in automotive, scientific and medical applications, as well as in circuit design. With its high reliability and low power consumption, the SN74HC245DWG4 is a great choice for many application fields.

The specific data is subject to PDF, and the above content is for reference