SN74HC253ANG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74HC253ANG4 logic family has a variety of application fields, but is primarily used as a signal switch, multiplexer, or decoder. It is used when low-level signals must be converted to higher voltage levels, or vice versa. This allows a range of digital output signals to be manipulated, or digital input signals to be reinterpreted at a higher level.

The SN74HC253ANG4 logic family consists of two four-input multiplexers and one eight-input multiplexer. Each of the eight-input multiplexers has two select inputs, two enable inputs and inverting and non-inverting output. The two four-input multiplexers each have one select input, one enable input and inverting and non-inverting output. This combination gives the SN74HC253ANG4 the flexibility to handle up to eight input signals.

The SN74HC253ANG4 device employs input positive logic, which means that the logic level \'high\' is the logic level \'1\' and the logic level \'low\' is the logic level \'0\'. The input and output signals of the SN74HC253ANG4 are TTL compatible, thus allowing the device to be interfaced with a variety of digital logic systems.

The working principle behind the SN74HC253ANG4 is relatively simple. All that is required to operate the device is to choose which input to route to the output by setting the selection input, and then enable the output by setting the enable input. Depending on which selection input is set, the chosen input will be enabled.

The SN74HC253ANG4 can be used to switch or multiplex multiple input signals onto one output. The device is also useful as a decoder, in which it will interpret the digital input and route it to the corresponding output. In applications where multiple digital input signals need to be switched, or converted, the SN74HC253ANG4 is ideal.

The SN74HC253ANG4 is particularly valuable for those applications requiring higher logic levels, such as analog-to-digital converters, digital-to-analog converters, and complex data bus systems. It is also well-suited for use in applications where noise suppression is necessary, especially in motor and motor control circuits.

The SN74HC253ANG4 is a unique and versatile piece of logic circuitry, and can be employed in a variety of applications, from simple data handling to complex logic manipulation. Its flexibility, ease of use, and cost effectiveness make it a preferred choice for many companies.

The specific data is subject to PDF, and the above content is for reference