SN74HC273DWRE4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74HC273DWRE4 is a logic device used as a Flip-Flop or as a latch in digital logic circuits. It\'s a Quadruple Positive-Edge Trigger D-Type Flip-Flop, which is an advanced version of the SN74HC273D integrated circuit. It has a significantly faster operating speed than the SN74HC273D. The difference between the two is that the SN74HC273DWRE4 has two power supplies instead of one. The two power supplies allow for faster signal input speeds and greater flexibility for logic circuit design.

The SN74HC273DWRE4 is composed of four D-type flip-flops with individual data, set, and reset inputs, and individual clock enable inputs. It can operate in either the set-reset or toggle mode of operation depending upon the state of the set and reset inputs. When the set and reset inputs are high, the output will toggle; this is the toggle mode of operation. When the set or reset inputs are low, the output will be set or reset; this is the set-reset mode of operation. The SN74HC273DWRE4 also has an output enable input which allows the internal flip-flops to be enabled or disabled. When the output enable is high (active low) the output is enabled, and when it is low (active high) the output is disabled.

The SN74HC273DWRE4 has a wide range of applications. It is commonly used as a flip-flop in digital logic circuits, such as a clocked data latch, and as a signal latch or memory element in digital logic circuits, such as a ripple counter. It is also used as an Edge-Triggered D-type Flip-Flop in microprocessor applications. Additionally, the SN74HC273DWRE4 can be used in a wide variety of other digital logic circuits, including shift registers, counters, adders, pulse generators and delay circuits.

The SN74HC273DWRE4 is a highly reliable and durable component. It is designed to operate over an extremely wide range of temperatures, from -40°C to +85°C. This allows for reliable operation even in harsh environments. Additionally, the component is protected against electrostatic damage and it is resistant to fault-induced noise and transients. It also has advanced protection features, such as built-in latch-up protection, to ensure reliable and uninterrupted operation.

The SN74HC273DWRE4 Flip-Flop features synchronous operation, which means the outputs of the flip-flops will change state simultaneously on a positive edge of the clock. This allows for precise timing control over the operation of these digital circuits.

In conclusion, the SN74HC273DWRE4 is an advanced version of the SN74HC273D, featuring two power supplies and greater speed. This gives it a wider range of applications and greater flexibility for digital logic circuit design. The component also has advanced protection features, such as built-in latch-up protection, to ensure reliable and uninterrupted operation in a wide range of temperatures. It is a highly reliable and durable component, designed for fast and efficient operation in digital logic circuits.

The specific data is subject to PDF, and the above content is for reference