SN74HC377NSR Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74HC377NSR is a member of the TI 74HC family of high-speed CMOS logic devices. This device is designed for multiple-power-supply operating ranges of 1.2V to 6V and 0.8V to 6V. The SN74HC377NSR is a Quad D-Type Flip-Flop with complementary outputs, featuring edge-triggered commands and asynchronous set and reset. Flip-Flops are basic Synchronous Digital Logic Elements (SDLEs) which are used to capture data. There are many different types of Flip-Flops with different characteristics. Flip-Flops are featured in most digital logic circuits and serve as elements of complex systems.

The SN74HC377NSR Flip-Flop has four independent Flip-Flops in one integrated circuit that are interconnected with common clock and clear pins. Each Flip-Flop is composed of an SR latch, an internal resistors, a 10KΩ pull-up resistor and a bi-directional transmission gate. The device features an asynchronous reset and an asynchronous set, which are used to initiate the Flip-Flops. The text ‘clear’ indicates a clear register condition, while the text ‘set’ indicates an initialization condition. If both inputs are low, the output will remain in the last state.

The SN74HC377NSR Flip-Flop has several important applications that make it an ideal choice for many digital systems. It can be used in a variety of designs such as sequential circuits, memory circuits, frequency-divider circuits, shift-register circuits and other applications. The device is also used for analog to digital conversion and for synchronizing captured data before further processing. In addition, the device is used when synchronizing data from multiple sources and for storing conditions.

The SN74HC377NSR Flip-Flop works on the principal of edge-triggered commands that determine the state of the output. When a positive-going edge is detected on the clock input pin, a pulse is generated that triggers the data bits present at the D inputs. The output Q will then have the same state as the data input. If a negative-going edge is detected on the Clear input, the Flip-Flop will be reset and the output will be cleared. Furthermore, if a negative-going edge is detected on the Set input, the output will be set to the high logic level.

In conclusion, the SN74HC377NSR is a Quad D-Type Flip-Flop with complementary outputs. It is versatile and can be used for a variety of digital applications such as analog to digital conversion, synchronizing the captured data, storing conditions and for use in sequential circuits and memory circuits. Furthermore, the SN74HC377NSR works on the principle of edge-triggered commands that determine the output state. This makes the SN74HC377NSR an excellent choice for many digital system design requirements.

The specific data is subject to PDF, and the above content is for reference