SN74HC4020DBR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74HC4020DBR is often referred to as a counter module, but it is actually a 14-stage synchronous shift register. It is most often used as a counter in applications such as time-quality controllers, frequency dividers, and multiplexers. In this article, we’ll discuss the SN74HC4020DBR’s application field and working principle.

The SN74HC4020DBR belongs to the Texas Instruments 4000-series logic ICs. It is a 14-bit synchronous, serial-to-parallel shift register with asynchronous clear, output enable and clock enable controls. There are 14 outputs that operate in toggle mode or synchronous data mode. The SN74HC4020DBR is a versatile device for many applications in which logic expansion or data manipulation is required.

The SN74HC4020DBR is a logic device that can be configured as a counter, divider, multiplexer, or shift register. It is often used in frequency-division applications in which a cycle-accurate counter is required. In this case, the output is only enabled when the chosen number of clock pulses have been counted so that the out signals are accurate in relation to the input frequency. In addition to frequency-division, the SN74HC4020DBR can also be used to divide down larger binary numbers into smaller binary numbers. This is useful in many digital applications in which the data must be divided down into smaller packets for transmission or storage.

The SN74HC4020DBR is an easier-to-use device than some other types of counters. It requires only one clock input and one clear input to operate. The device does not require additional logic gates or other components to form a full-function counter. This simplifies the circuit design for applications that use this device and makes it a great choice for time-quality controllers and frequency dividers.

The SN74HC4020DBR’s working principle is based on shift registers. The device is composed of 14 individually addressable registers, each providing one bit of information. When the clock input is low (at logic 0), the content of each register is shifted to the right, and the topmost bit is loaded onto the next register. When the clock input is high (at logic 1), the contents of the register remain unchanged. The clear input can be used to reset the state of the counter.

Each of the 14 output pins has its own clock enable, output enable, and clear functions. The clock enable input controls the output pin’s state. The output enable input controls the functionality of the output pin’s clear pin. When the output enable input is low, all of the output pins are disabled. The clear input can be used to reset the state of the counter to 0.

The SN74HC4020DBR is a versatile logic device that can be used in a wide variety of applications. It is a great choice for frequency dividers, multiplexers, and time-quality controllers. It is easy to use and requires only one clock and one clear input to operate, making it a great choice for simple circuit designs. Its 14-bit synchronous, serial-to-parallel shift register design makes it a great choice for applications that require data manipulation or logic expansion.

The specific data is subject to PDF, and the above content is for reference