SN74HCT240PWT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic - Buffers, Drivers, Receivers, Transceivers

SN74HCT240PWT is a quad buffer that implements the non-inverting open-collector bus structure. It is designed with four independent wideband buffers designed to drive Bus Lines. It provides a low-power logic buffer suitable for low-voltage applications using SN74HCT technology. This part is characterized with multiple power supply voltages (2.0V to 6.0V).

The device is used to buffer the input of the data bus and to drive the output of the data bus when used as transceivers. The device typically provides narrow bus lines or low power applications with either pull-up resistors or pull-down resistors. The output characteristics are optimized for high-speed operation with balanced system loads and for low power applications. The output stage of the device is designed to be high-impedance when disabled in order to avoid any overvoltage conditions.

SN74HCT240PWT working principle

When the output buffer is enabled, the output will be a logic high if the input is high and a logic low if the input is low. If the output buffer is disabled, the output is in high-impedance state. The output buffer can also be enabled and disabled as needed by controlling the output enable (OE) input pin. The SN74HCT240PWT has two control inputs for enabling and disabling the output buffer. The other input is the output enable (OE) control line, which can be used to enable or disable the output buffer for synchronous or asynchronous applications.

The SN74HCT240PWT has three main circuit blocks – logic input buffer, logic output buffer and clock buffer. The logic input buffer converts the logic signal from the logic input to the logic output. The logic output buffer buffers the logic signal from the logic output to the logic output pin. The clock buffer provides the clock signal to the logic input and logic output pins. The logic buffer provides the control signals to the logic input and logic output pins.

The SN74HCT240PWT also provides overcurrent protection and ESD protection. It has an input protection diode to protect against input signal overvoltage and an output protection diode to protect against output signal overvoltage. The device also has an active-high or active-low output enable signal which is used to enable or disable the output buffer. The device can provide a low-power logic buffer suitable for low-voltage applications when powered by a single supply voltage.

SN74HCT240PWT application fields

The SN74HCT240PWT can be used in a wide range of applications, from low-power logic buffering in low-voltage and low-power devices, to higher-speed logic buffering for higher-performance systems. The device is suitable for applications where reliable operation is required, such as driving LEDs, relays, and other devices that require precise timing. The output buffers can also be used in applications such as motor control, signal control, and voice communications.

The SN74HCT240PWT is also suited for various embedded applications such as in MCU/DSP/FPGA designs and also in automotive electronics. It has a low-power operational feature which makes it an ideal choice for applications with low-power-budget. As a logic buffer, it can provide data throughput for up to 32 I/O signals at the same time with its wideband driving capability. Its low-power operational feature makes it an ideal choice for applications with low-power-budget.

In summary, the SN74HCT240PWT is a low-power, wideband logic buffer designed for applications requiring reliable logic buffering in various levels of environments. It is suitable for low-voltage applications and provides high-speed performance with low-power usage. It also provides protection against over-voltages and ESD protection. It is suitable for applications where reliable operation is required, such as driving LEDs, relays, and other devices that require precise timing.

The specific data is subject to PDF, and the above content is for reference