SN74HCT244NG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

SN74HCT244NG4 is a device belonging to the “Logic – Buffers, Drivers, Receivers, Transceivers” category of ICs, and it is made by Texas Instruments. It is an Octal buffer/line driver with 3-state outputs, meaning that it can act as an interface between digital logic circuits on a printed circuit board (PCB) and other parts of the circuitry.

Application Fields

The SN74HCT244NG4 has many applications where it can be used effectively. It can be used for bus buffers, bus driver abstraction, bus transceivers, bidirectional level-shifters, wide-bus drivers, or as an interface between two different types of busses. It can also be used in registers and tri-state buffered memory address drivers.

It is designed to operate at 3.3V power supply and also at 5V power supply, making it suitable for powering modern electronics that operate with low voltage but may also need compatibility with older/existing electronics that are powered by 5V.

The SN74HCT244NG4 also features a typical power dissipation of 420mW at 5V, meaning that it can be used in areas that require less energy consumption. It is fast, boasting propagation delays of 18ns max, making it suitable for high speed applications.

Working Principle

The SN74HCT244NG4 is a logic level 8-bit buffer as well as a line driver, for data buses carrying digital information such as 1’s and 0’s. It is registered with 3-state outputs, which means that electric signals passing through it can be either enabled or disabled, depending on the input it receives.

The SN74HCT244NG4 is configured with 2 independent 4-bit buffers in the same chip, each buffer comprising of one positive edge triggered latch and one control input. Data can be latched into these buffers through the 8-bit data inputs (I0-I7), while being latched simultaneously. They can be enabled or disabled individually through their control inputs (WE0-WE1), allowing both buffers to operate independently of each other.

The 8-bit buffer outputs (O0-O7) are 3-state outputs, meaning that they can be enabled or disabled depending on the logic input that it receives. When enabled, these outputs are controlled by the output enable (OE) input, with high logic indicating that the buffer output is enabled. When OE = low logic, the buffer output is disabled and its output voltage is equivalent to that of the VCC or VEE.

The SN74HCT244NG4 has input protection from overvoltage and surge protection, meaning that it can withstand voltages of up to 7V. This makes it suitable for applications that need a rugged design capable of tolerating high levels of voltage.

The SN74HCT244NG4 also has a logic level translation function, allowing it to translate signals between different logic levels, facilitating different types of logic integration.

Conclusion

The SN74HCT244NG4 octal buffer/line driver with 3-state outputs has many applications due to its power efficiency and its ability to enable/disable its 8-bit output lines. It is also capable of providing logic level translation, enabling it to integrate different types of logic seamlessly. With its overvoltage and surge protection, it is well-suited for high-voltage applications, making it a versatile device for data bus operations.

The specific data is subject to PDF, and the above content is for reference