SN74HCT541DWG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74HCT541DWG4 is a non-inverting 8-bit buffer/line driver designed for the 3.3–V VCC to 5.5–V VCC range, allowing voltage-level translation between nodes operating in different voltage domains. This device also provides true logic-level conversion in either direction between 5.5 V and 3.3 V domains. With an output sink-current capability of 24 mA and a source-current capability of 8 mA, the SN74HCT541DWG4 is ideally suited for driving bus lines or other networks. The chip is manufactured using CMOS process technology for low power dissipation and high-speed operation.

The output buffers from the SN74HCT541DWG4 are configured as 8-bit non-inverting tri-state buffers. This type of circuit consists of a pair of N-type MOSFETs in series connected to VDD and a feedback path to ground. A logic 1 output drives both MOSFETs to enhanced region, causing the output to go high. A logic 0 output causes both MOSFETs to turn off, resulting in an open-drain or tri-state output. The multiplexed address and data buses require the line drivers to turn off (tri-state) quickly. This is accomplished on the /OE line by connecting it to a logic 0. A logic 1 on /OE causes the output of the buffer to follow the input levels. The latch enable (/LE) line controls the output of the SN74HCT541DWG4 by disabling the entire device when it is asserted to a logic 1. The SN74HCT541DWG4 also contains an active high reset (/R) and active low /I line which can be used as an active low reset.

The SN74HCT541DWG4 is usually used in logic applications, allowing the user to connect and convert logic levels between various VCCs. The dual-supply range of 3.3 V to 5.5 V enables the device to provide low-voltage logic translation. One of the common applications of the SN74HCT541DWG4 is in secure, battery-backed system designs. In these applications, the SN74HCT541DWG4 can be used to couple multiple digital systems at different voltage levels. This also allows for interfacing with several different memory components, making it ideal for memory address expansion.

The SN74HCT541DWG4 is also used in levels of logic systems, where it acts as a level shifter. This enables the user to convert TTL type logic to CMOS levels and vice versa. The high speed and low power consumption of the SN74HCT541DWG4 makes it ideal for these types of applications. The device is also used in data communication applications. The SN74HCT541DWG4 can be used to interface logic signals between various systems. The device is ideal for use on Ethernet networks, RS-232 or RS-485 data connections, or other digital systems with high speed requirements.

The SN74HCT541DWG4 is used in many other data communication applications, such as serial communications, wireless data transmission, networking, and satellite communication. It can also be used to interface logic signals to audio systems and video systems. In the industrial field, the SN74HCT541DWG4 is widely used in the automotive sector and in telecommunication systems.

In summary, the SN74HCT541DWG4 is a versatile logic buffer/line driver designed for the 3.3–V VCC to 5.5–V VCC range. It provides true logic-level conversion in either direction between 5.5 V and 3.3 V domains. This device is widely used for applications such as secure battery-backed systems, levels of logic systems, and datacommunication systems. Additionally, it is used in industrial settings, such as the automotive sector and telecommunication systems.

The specific data is subject to PDF, and the above content is for reference