SN74HCU04DG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74HCU04DG4 is a high-speed CMOS logic device with a hex inverter with open-drain outputs. It belongs to the Logic - Gates and Inverters category. These devices are ideal for systems where low-power dissipation and high noise immunity are essential.

The SN74HCU04DG4 has a broad range of applications that range from basic logic gates to industrial and military grade system control. They are often used as CPUs for automotive systems, industrial automation controllers, LCD controllers, medical systems, military and aerospace systems, among other applications. Due to its high speed and integrated protection circuitry, its implementation is low-cost.

The working principle of the SN74HCU04DG4 is similar to any other logic gate and inverter. An input signal A is supplied to pin 1 of the logic chip. Depending on the logic state of the input signal, the chip gate will then generate an output on pin 3 according to the gate\'s Boolean expression. Output pins correspond to each input pin. Additionally, the outputs are open drain and capable of sinking current. This feature can be used to turn on and off several devices. For example, two output pins can be connected to a load and then the load can be turned on and off by the chip.

The SN74HCU04DG4 offers a low-power dissipation of 1.25 mW for each gate as well as high ESD protection. The device is made up of four NAND input gates and a reversed polarity gate, thus making it ideal for applications where high speed and low power consumption are mandatory. Additionally, the device is provided with an enable pin making it easy to set up selective enable and disable ports.

In summary, the SN74HCU04DG4 is a high-speed CMOS logic device with a hex inverter with open-drain outputs which belongs to the Logic - Gates and Inverters category. In addition to its broad application field, it offers excellent noise immunity and an enable pin for selective enable and disable ports, making it an ideal device for various control projects. Its correct application and use will depend on a thorough understanding of its working principle and the electrical properties of the chip.

The specific data is subject to PDF, and the above content is for reference