SN74LS375NG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SN74LS375NG4 is a 6 bit buffer latch which mainly used as a status register in digital circuits. This device belongs to Logic-Latches as it uses a single input register to represent and store the input. It can be used as individual latches or configured together to form an 8 bit latch. By toggling the LE(Latch Enable) pin, data can be moved from the input register to the output register.

The device is generally found in microprocessor based systems and other digital circuits. In a microprocessor based system, SN74LS375NG4 can be used to store the status of the microprocessor. The various inputs can be used to process the data and the output can be used further for other functions. For example, a digital read-write program can be written using this device. The microprocessor can then read the input and write the output as needed.

The SN74LS375NG4 uses a positive-edge-triggered operation, meaning that data can only be transferred to the output register when the LE (Latch Enable) pin is set to high. When the LE is low, the data is maintained in the input register and is not transferred to the output. The data is maintained due to the use of two flip-flops in the output register which latch the data for each time the LE pin is enabled.

The device does not require any external clock and operates on a single 5 V supply. It has 6-bit-wide data input from D0 to D5 and 8-bit-wide data output from Q0 to Q7. It has an active low enable input, LE, which is used for latch enabling. Additionally, it has an active low reset (S0) pin used for resetting the latch device to its initial state.

In summary, SN74LS375NG4 is a 6 bit buffer latch which belongs to Logic-Latches. It is mainly used as a status register in microprocessor based systems and other digital circuits. It is positive-edge-triggered, has no external clock, operates on a single 5 V supply, and has an active low enable input called LE which is used for latch enabling.

The specific data is subject to PDF, and the above content is for reference