SN74LS85DR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74LS85DR is a 4-bit magnitude comparator, which is commonly used in digital electronics. It is used to compare two binary numbers and output a high or low signal according to the result of the comparison. This is why it is classified under logic-comparators.

This device is made up of 16 digital signal transistors (D-type flip-flops) connected in a combinational network. Each of the four stages of the device consists of two sets of flip-flops; each set is connected to a multiplexer, which serves as the ‘output control’ of the device. The flip-flops are configured to store the two sets of 4-bit binary numbers that are to be compared.

The input pins for the two 4-bit numbers are labeled ‘A0’ through ‘A3’, and ‘B0’ through ‘B3’ respectively. The two output pins labeled ‘L’ and ‘H’ are used to indicate the results of the comparison; a low (L) signal indicates that the ‘A’ input is numerically less than the ‘B’ input, while a high (H) signal indicates that the ‘A’ input is numerically greater than the ‘B’ input.

The SN74LS85DR can be used in a wide range of applications, including data comparison and sorting, analog-to-digital (A/D) conversions, and digital timing systems, among others. For instance, the device can be used to detect the difference between two digital signals, and then set off a certain circuit in response to the difference. This could be used, for example, to trigger a sound-generating circuit when the difference between two temperature signals falls below a certain threshold. In an A/D converter, the device can be used to compare the analog input with a reference voltage, and then output a digital signal corresponding to the result of the comparison.

The SN74LS85DR is relatively easy to use and provides a wide range of applications and functions. It is an ideal component for digital systems, and will continue to be an important component in modern digital electronics.

The specific data is subject to PDF, and the above content is for reference