SN74LS93NSR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74LS93NSR is a part of a logic family of counter, dividers and shift registers. The SN74LS93NSR is a dual counter with additional gating which is used to count the number of pulses applied externally. These dual counters are used in a range of applications such as frequency division, pulse width narrowing/widening, pulse placement, location or clocking and also in multiplexers.

The SN74LS93NSR is a logic device with separate synchronous and asynchronous inputs. It has two separate counters, one synchronous counter and one asynchronous counter. The synchronous counter is the master counter which is clocked by the signal for the input pulses. The asynchronous counter is the slave counter which is clocked by the Q output of the master counter. Each counter has its own output for the TTL direction. The two counters of the SN74LS93NSR also share a single reset pin. When triggered, this will reset both the master and slave counters back to 0.

The SN74LS93NSR is constructed using CMOS Integrated Circuit Technology. This allows the device to operate with a minimal amount of power. This makes it a great device for low power applications when compared to the other standard logic devices used in the same applications. It also provides the user with a high noise immunity. This makes the SN74LS93NSR a great device for harsh or noisy environments as it won\'t be affected as much by unwanted noise.

The SN74LS93NSR\'s working principle is relatively simple. When an input pulse is applied, it is counted by the master and slave counters. The output of the master counter then triggers the slave counter, which in turn will count the pulses. When the output of the master counter reaches its maximum count, both counters will be reset and the counting process will start from 0 again.

The SN74LS93NSR is commonly used in radio burst detectors, frequency dividers, pulse width narrowing/widening, and period measurement systems. It can also be used for general timing and counting applications. The SN74LS93NSR is already a widely used integrated circuit and will most likely continue to be used for many more years to come, as it offers a great combination of reliability, power efficiency, and cost effectiveness.

The specific data is subject to PDF, and the above content is for reference