SN74LV245ANSRG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74LV245ANSRG4 is a Buffer/Line Driver, Receiver and Transceiver under the Logic - Buffers, Drivers, Receivers, Transceivers category. The SN74LV245ANSRG4 is an octal bus transceiver that combines a bus buffer and data routing for simple system designs. The SN74LV245ANSRG4 contains 8 independent non-inverting bidirectional buffers, drivable by both 3.3V and 5V logic levels. Each buffer has two separate enable input pins, one for receiving 3.3V logic level and one for 5V logic level.

The two enable inputs are designed to be active-low for easy interface to TTL level (or higher) logic. The SN74LV245ANSRG4 provides both 3.3V and 5V voltage tolerant input/output port so it can be used as a level shifter between 5V and 3.3V system devices. The 18V absolute maximum voltage tolerant is beneficial in some applications where the voltage might rise up to 18V.

The SN74LV245ANSRG4 can be used in a wide variety of applications, such as data transfer and synchronization among 3.3V and 5V logic, level shifting between the two voltage levels, powering up of digital circuits and driving 8-bit micro-controller ports. The driver and receiver pins are interfaces between the devices which are to be connected.

The SN74LV245ANSRG4\'s working principle is based on Non-inverting Buffers/Line Drivers, Receivers and Transceivers. This device takes input from the buffer or receiver and transmits it onto the output. The enable pins are used to control the direction of the data flow and the output pins are used for the actual data transmission. A buffer is used to store the data which is to be transmitted to differential levels, 3.3V and 5V. A receiver takes the differential inputs of the buffer and the output of the buffer is the output of the receiver.

The SN74LV245ANSRG4 has an active-low enable pin that helps to disable the buffer. The receiver also has an active-low enable pin, which on being enabled, will ID and interpret the data found in the incoming bus. Drivers are also used to transmit thedata and can be used to provide voltage levels which can range from 3.3V-18V.

The SN74LV245ANSRG4 is a low power logic extended temperature range device with a high operating temperature of 125°C. The device has excellent noise immunity and supports a wide range of global voltages from 1.2V to 5.5V. The SN74LV245ANSRG4 also has good noise immunity for ESD, EMI and EMI immunity.

The device has a propagation delay of 3.5 ns, and a skew less than 75 ps. The output current is given as 5 mA to 24 mA. The SN74LV245ANSRG4 has a wide range of applications in signal buffering, low voltage interfacing, logic resetting and signal isolation.

Overall, the SN74LV245ANSRG4 is an excellent device for logic-based applications and can be used in a wide variety of applications. Its benefits are many, such as a wide range of global voltages and good noise immunity in order to provide reliable results. Its propagation delay and skew are good, allowing for quick data transmission and its low power requirement makes it ideal for battery powered applications. Moreover, the device is able to handle extreme temperatures of up to 125°C. In conclusion, the SN74LV245ANSRG4 is an excellent device for buffering, transmitting, and routing data in any logic-based application.

The specific data is subject to PDF, and the above content is for reference