SN74LV573ATDGVRG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74LV573ATDGVRG4 is a device that falls into the Logic - Latches category. This device is a 1-of-8 addressable latch with low-voltage (3.1V-3.6V) and TTL compatibility. It is primarily used in applications where multiple devices must be interfaced and or accessed. By using a single access line, eight devices or circuits can be controlled.

The SN74LV573ATDGVRG4 has several features that make it especially useful in application fields such as automotive, telecom and digital audio. Firstly, it is designed to be used with very small signals so as to not introduce any noise into these sensitive circuits. Secondly, the 1-of-8 addressable latch makes it possible to access or control 8 devices or circuits with a single access line. Thirdly, the low-voltage,3.1V-3.6V, makes it suitable for use in low power applications. Lastly, the TTL compatibility provides an easy interface to any TTL-based system.

The SN74LV573ATDGVRG4 is an 8-bit addressable latch whose operation is based on the 8-bit bus and three control signals. The 8-bit bus is used for the data bus and is composed of 8 lines (A7-A0). The three control signals are AEN, RWB, and RESETB. AEN, (Address Enable) and RWB (Read/Write) control the direction of data on the 8-bit bus. RESETB (Reset) is used to reset all of the latches to their initial state. A logic 1 on RESETB or AEN forces all of the eight output latches to their off-state.

AEN, RWB and RESETB determine what each latch will do. AEN is used to enable the address decoding and outputs. When AEN is low, the address decoding takes place and the 8 bits of information are loaded into the latch. The RWB signal is used to select whether the 8 bit bus is to be read or written to. When RWB is high, the outputs are loaded with the new data that is loaded on the bus, and when RWB is low, the stored data is available on the output. Lastly, the RESETB signal is used to reset all the latches to their initial off-state.

The SN74LV573ATDGVRG4 device can also be used in applications where multiple devices must be mutually interfaced and or accessed. By using a single access line, eight devices or circuits can be controlled with just one SN74LV573ATDGVRG4 device. This is especially useful for automotive systems, where multiple devices need to be automatically interfaced and dealt with in order to make a vehicle run effectively.

The SN74LV573ATDGVRG4 addressable latch is a versatile device that finds application in a wide range of different application fields. Its small signal operation, 3.1V-3.6V voltage, 1-of-8 addressable latch, as well as TTL compatibility, make it an ideal device for controlling multiple devices and circuits. And with its wide range of application fields, the SN74LV573ATDGVRG4 device is sure to become an integral part of many different systems.

The specific data is subject to PDF, and the above content is for reference