SN74LVC138AD

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic - Signal Switches, Multiplexers, Decoders are widely used in microelectronic circuits and communication systems. The SN74LVC138AD is a popular device in this family, with many applications as a 1-of-8 encoder, 4-to-16 decoder, or multiplexer.

The SN74LVC138AD is an integrated circuit logic device, consisting of a high-speed three-state 3-8 decoder and a Bus Buffer Gate Array. It can be used for applications such as data routing, encoding or decoding, and multiplexing. The 3-8 decoder can be used for data routing and multiplexing, for example between a central processor unit and peripheral devices/sensors. It is used to select a single output of eight based upon the state of three input bits. The 8 outputs are in 3-state, allowing them to be used as active high or active low. The Bus Buffer Gate array can be used to drive the outputs with increased speed and current rise time. The input data is controlled by a single logic input, the enable (E), which can be used to enable or disable the output.

In terms of its main operating principle, the SN74LVC138AD has three inputs, A, B, C. When all three inputs are simultaneously high, the output is in the high-impedance state. When one of these inputs is low, the output will be in the low state, depending on the combination of the inputs A, B, C. A logic high at E will enable the output, while a low will shut off any output that might be active. A truth table can be used to determine the output based on the combination of inputs.

For applications that require implementing a bus network, such as a computer system, the SN74LVC138AD can be used as a 1-of-8 decoder/multiplexer. The inputs A, B, C are used to select which output will be enabled for each particular combination. For example, the combination ABC would result in the output X_7 being enabled, while ABC would result in the output X_2 being enabled. It can also be used as a binary to one-of-eight decoder. The four input bits A, B, C, and D are used to determine which output will be enabled. By using the enable input E, the outputs can be disabled as needed.

The SN74LVC138AD can also be used as a 4-to-16 decoder/multiplexer. This device is operated in the same way as the 1-of-8 decoder/multiplexer, but it has four input bits instead of three. The four inputs are used to select which one of sixteen possible outputs will be enabled. The truth table for this device is slightly more complex than for the 1-of-8 decoder/multiplexer, but it is still quite simple to use.

The SN74LVC138AD is a versatile device that can be used in a wide range of applications. It can be used as a 1-of-8 decoder/multiplexer, 4-to-16 decoder/multiplexer, or multiplexer. Its output is in the 3-state, allowing it to be used with both active high and active low logic. Its main operating principle is based on the combination of three or four inputs and its enable pin.

The specific data is subject to PDF, and the above content is for reference