SN74LVC1G06DRLR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74LVC1G06DRLR belongs to the family of Logic Buffers, Drivers, Receivers, Transceivers. This device is a single-channel, active-low Non-Inverting Buffer. It is capable of driving up to a 12 mA load while also featuring a low, 6 mA supply current. The SN74LVC1G06DRLR is formed of two 1-input Buffers and can be operated in open-drain, push-pull or 3-state modes. It is available in a tiny SOT-353 package with a wide operating temperature range of –40°C to 125°C, making it suitable for various application fields.

In terms of application fields, the SN74LVC1G06DRLR digital buffer is frequently used in power distribution systems and automotive systems. It is also used in low voltage or high current applications, such as load Switching, Logic Interlock, Latching and Signal Buffering. It can be used to replace single device solutions in the case of short wiring distances, providing improved flexibility and reduced board space. The SN74LVC1G06DRLR is capable of running on both positive (VCC) and negative (GND) rail potentials, making it especially suitable in power distribution systems applications where a negative supply voltage is required.

In terms of working principle, the SN74LVC1G06DRLR buffer is a simple, single input non-inverting device. It converts a digital input signal into an amplified digital output signal, with the benefit of utilizing the inputted channel’s full data-rate definition up to 12 mA. The device logic threshold levels are compatible with both TTL and CMOS levels, simplifying the design of logic circuitry. The device logic threshold levels are defined as either high or low, depending on the power supply voltage. If the logic supply level is above the logic-high threshold, the input is considered to be a logic-high (1). Conversely, if the input is below the logic-low threshold, then the input is considered to be a logic-low (0).

The SN74LVC1G06DRLR buffer can work in one of three different modes. The standard push-pull mode provides an active-low logic output from the device, which can be used to drive a logic-low signal. The “open-drain” mode allows the device to be used to drive a logic-low signal, but is the highest performance mode and is the primary mode for this device. The third mode is termed “three-state”, and is the most commonly used in automotive systems. This mode allows outputs to be high-impedance, so as to not interfere with other signals on the same line.

To conclude, the SN74LVC1G06DRLR buffer is a versatile device which is suitable for use in various different application fields, such as automotive and power distribution systems. It is capable of running on both positive (VCC) and negative (GND) rail potentials, making it especially suitable in power distribution systems applications where a negative supply voltage is required. The device features three working modes – push-pull, open-drain and three-state – allowing it to be used in various different applications.

The specific data is subject to PDF, and the above content is for reference