SN74LVC1G07DCKR Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74LVC1G07DCKR is a Logic Buffer IC that belongs to the category of Buffers, Drivers, Receivers and Transceivers. It is a Single-Line Low-Voltage FET Driver and is designed to positively deliver high amplitude electrical signals with very low power consumption. This IC is mainly employed in various telecom and computer applications ranging from simple digital isolator and voltage level translator to a high-speed level shifter.

The SN74LVC1G07DCKR has been designed with an output voltage of 1.5 to 3.6V and an input voltage of 1.65 to 3.6V. It also supports an operating temperature range from -40°C to 85°C. The device can be used for both asynchronous and synchronous operation.The output logic level can be adjusted by varying the input voltage, and it is fully compatible with other logic families such as CMOS, LVCMOS and TTL.

Working Principle of SN74LVC1G07DCKR

The SN74LVC1G07DCKR makes use of a single-pole single-throw circuit to provide a high current output. The IC is triggered by sensing the logic state on its input line and then driving a FET based output. This drive circuit is designed to deliver high absolute maximum output current of 14mA while consuming very low power.

The CI has a single ground pin, two input pins and two output pins. The two input pins are logic input and low side drive enable. The two output pins are high side output and low side output. The logic input pin receives the input high or low logic level which is then converted to its output form. The low side enable pin is used for enabling the low side output. When this pin is high the low side output will be triggered and current will flow through it.

The IC works in three modes: Sequential Mode, Mixed Mode and Gate Mode. In Sequential Mode, both input pins are driven from the same logic level and the output will turn on when the voltage on the logic input pin is higher than the voltage present at the low side enable pin. In Mixed Mode, the SN74LVC1G07DCKR will be triggered when either logic or low side enable supplies the higher voltage. And in Gate Mode, the SN74LVC1G07DCKR acts like a two port switch and is triggered using a combination of both input pins.

The SN74LVC1G07DCKR is an ideal choice for its high-speed, low-power and small size features. The device offers superior noise immunity and can beat any other competing designs. It can also be used in a wide range of applications such as medical devices, test equipment, automotive, industrial machines, communication devices and industrial PCs.

Applications of SN74LVC1G07DCKR

The SN74LVC1G07DCKR can be useful in many applications due to its impressive features. Some of the applications of this IC are as follows:

• The IC is well-suited for level translation when an interfacing between two different voltage level circuits is necessary. It is often used for powering and isolating low-side and high-side units within the same device.
• It is very often employed in motor control, as it can be used in conjunction with PWM signals and rising/falling edges. This helps in driving large current flows through the motor.
• The device is also used in LCD panel driving, especially in mobile phones and PDAs.
• It is employed in various telecom applications such as level translation and signal switching.
• It is used in various computer applications such as digital isolator and voltage level translator.
• The SN74LVC1G07DCKR can also be used as an on/off switch for controlling and adjusting the flow of current in certain circuits.

The SN74LVC1G07DCKR is a worthy choice when you need a high current output with low power consumption and superior noise immunity. The IC is ideal for motor control, level translation and switching applications and can be employed in various telecom, computer and industrial applications.

The specific data is subject to PDF, and the above content is for reference