SN74LVC1G29DCUT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74LVC1G29DCUT is an integrated circuit that is typically used as a device switch. It belongs to the category of logic – signal switches, multiplexers and decoders. An application field for this device would be in the manufacture of high-speed and low power logic applications.

The SN74LVC1G29DCUT is a single 2:1 analog multiplexer/demultiplexer that optically isolates its enabled logic signal with a complementary and noncomplementary output. It uses TTL logic family, operates as 3-state and offers an operating temperature range of -40°C to 85°C. Also, it has maximum propagation delay of 32 ns and features a maximum output low voltage of 0.5 V at 4.5 mA.

In terms of its mode of operation, the SN74LVC1G29DCUT contains two digital inputs A and B, and one digital output Y. When enabled, A and B are decoded into one of four binary codes (00, 01, 10, 11). Depending upon the inputs, the output Y either follows the input A, gets logically complement of the input A, or remains in a high-impedance state.

The SN74LVC1G29DCUT also has two enable inputs, ENB and ENA, for its output Y. If a logic high is applied to either of these two inputs, i.e. when ENA = 1 or ENB = 1, the output Y is in the high-impedance state, otherwise it will be equal to the input A or its complement.

Its design further facilitates receiving an input signal to its optical stage by providing it with a digital control logic that converts logic-level signals into an analog signal at the input of the optical Isolator, and provides the inverse functionality on its output side. In this way, isolation is ensured for the output signal.

In summary, the SN74LVC1G29DCUT is suitable for applications that require high-speed and low power logic. It provides its users with multiple functionalities as it combines a 2:1 multiplexer/demultiplexer IC with an isolator and a digital control logic to drive the optical stage. Its input and output are compliant with the TTL logic family, which makes it easier to integrate into existing TTL logic-based circuits.

The specific data is subject to PDF, and the above content is for reference