SN74LVC1G3208DBVT

Series:	74LVC
Packaging:	Tape & Reel (TR)
Part Status:	Active
Logic Type:	AND/OR Gate
Number of Circuits:	1
Number of Inputs:	3 Input (2, 1)
Schmitt Trigger Input:	No
Output Type:	Single-Ended
Current - Output High, Low:	32mA, 32mA
Voltage - Supply:	1.65 V ~ 5.5 V
Operating Temperature:	-40°C ~ 125°C
Mounting Type:	Surface Mount
Package / Case:	SOT-23-6
Supplier Device Package:	SOT-23-6
Base Part Number:	74LVC1G3208

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74LVC1G3208DBVT is a logic device capable of being configured with a specialized combination of pass & drive signals, designed within a single device. It measures 3.00mm x 3.00mm, and operates at a supply voltage of 1.14V - 3.6V, with its power dissipation at around 80mW. Surface mount technology helps in mounting the device with ease and its increased robustness allows protection against harsh conditions. The operating temperature range is -40°C to +85°C.The SN74LVC1G3208DBVT typically finds application fields such as bus line-drivers in clock networks, transmission-line drivers, differential bus line receivers, data clock separators, fault-protected multiplexers, and general buffers. It is also used for surge suppressors and timing circuits, in addition to protection of input and output lines from faults.The SN74LVC1G3208DBVT includes an OR function, a 3-state buffer, and an inverter. As such, it is a multi-function, configurable device. It has two 8-bit data modes and two 8-bit address modes, as well as transmission-level synchronization. An advanced Schmitt trigger technology modified inversion logic helps in providing unmatched glitch-free performance in a very small landing area. The device\'s properties also allow it to provide improved electrical performance in terms of power dissipation, signal-to-noise ratio, crosstalk immunity, and signal slew rate.The SN74LVC1G3208DBVT\'s working principle is simple yet effective. Whenever a logical gate is powered by a voltage signal, it goes through a switching process. When the input becomes lower than the predetermined threshold, the output becomes inverted and the output becomes higher than the input voltage. This effect is then coupled and combined with the additional functions of the device, such as an OR function, a 3-state buffer, or an inverter.The SN74LVC1G3208DBVT is also capable of providing an integrated 4-bit tri-state parallel-output data line-driver, with additional 600 mV common-mode range, for high speed and low power consumption. It also includes a data latch function capable of providing an integrated 4-bit parallel-output data line-latch, with open-drain drivers, buffered outputs, and selectable drive-level supports. Furthermore, the device is also capable of providing an integrated Clamp Input function, allowing high speed and low power consumption.The SN74LVC1G3208DBVT was designed primarily as a pass and drive signal device, to enhance the functionality of the device in an array of complex systems, such as fault protection multiplexers and transmission line-drivers. It incorporates a variety of features, such as its integrated OR and 3-state buffer functions, as well as an inverter logic, providing unmatched performance even in the most harsh of conditions. The device has the capability to provide improved electrical performance thanks to its increased power dissipation, signal-to-noise ratios, crosstalk immunity and signal slew rates. All of this makes the SN74LVC1G3208DBVT an interesting, versatile and reliable device for a variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description