SN74LVC2T45DCUR Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74LVC2T45DCUR is a high-performance, low-voltage, dual-channel, non-inverting bus/level translator. It can drive one TTL (Tx side) to one of five selected Vcc ranges, including 3.3V, 2.5V, and 1.8V. This device operates over the industrial temperature range of -40°C to 85°C. The SN74LVC2T45DCUR can be used for small-signal data, address, and control lines in a variety of applications. In addition, this device is ideal for data rate and power consumption critical applications, as well as those requiring small number of logic transitions.

The SN74LVC2T45DCUR can be used in a variety of logic-level, level-shifting, and voltage conversion applications. The dual-channel design of the device provides for simultaneous level-shifting and voltage conversion for both sides of the transmission line. The device’s wide range of input voltage levels enable it to be used in applications where the input signals are at different voltage levels. This makes the SN74LVC2T45DCUR a versatile device, as it can be used in a variety of circuits, including those outside the traditional TTL logic range.

The SN74LVC2T45DCUR works by buffering and inverting the input signal. The input voltage level is compared to a known reference voltage and the output is then adjusted to the intended level. This type of level-shifting is known as “speed bumping” because the output is not necessarily at the same level as the input. For example, if the input is a 5V signal, the output may be a 3.3V signal, depending on the reference voltage setting.

The SN74LVC2T45DCUR also features input and output thresholds that can be adjusted according to the application. This allows for greater flexibility, as these thresholds can be adjusted for applications that require higher than normal logic levels. Additionally, this device features a low-power shutdown mode. This mode allows the device to save power when it is not in use.

The SN74LVC2T45DCUR is a versatile device that provides logic-level and voltage translation for a wide range of applications. Its low-voltage, dual-channel design allows the device to be used in applications that require the input and output to be at different voltages. The adjustable input and output thresholds give this device greater flexibility in applications that require high-level logic levels. Finally, the device’s low-power shutdown mode makes it ideal for applications that require low power consumption.

The specific data is subject to PDF, and the above content is for reference