SN74LVC373AN

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74LVC373AN is a high-performance octal positive-edge triggered D-Type Flip-Flop IC belonging to the Texas Instruments’ Low Voltage series. It measures in a very small 8-pin package with a maximum clock input time of 7 nanoseconds, which makes it very versatile and efficient for a wide range of applications. It is commonly used in logic circuitry, specifically in applications of latches, registers, counters, and synchronizers. This article will give a detailed overview of the SN74LVC373AN application fields and working principles.

SN74LVC373AN Application Fields

The SN74LVC373AN is a toggle latch with a wide range of application potential ranging from automotive to industrial grade systems. It is used in these systems for clocking signals and providing digital memory of state. This makes the SN74LVC373AN very useful in devices requiring dynamic or relatively higher speed circuits. The fast clock speed works well in combination with high motion control requirements and complex timing applications. It is also used on controller boards in lower speed situations, such as consumer electronics.

In addition, the SN74LVC373AN is also used to create a type of control loop called ‘convergence’. Convergence loops are used to iteratively measure and/or adjust a parameter until it reaches a desired value or state. By using the positive-edge triggered flip-flop and the fast clock speed of the SN74LVC373AN, the efficiency of the control loop can be significantly improved by reducing the time it takes to reach the specified target.

The FLOP-FLIP toggle latch is also used in a variety of electrical circuit designs. It is useful in general feedback systems, such as power supplies, audio amplification and control circuitry. The toggle latch is also beneficial as a stand-alone device for digital memory applications or for clocking signals. The SN74LVC373AN also has a high switching speed, making it perfect for high speed applications.

SN74LVC373AN Working Principles

The SN74LVC373AN is composed of two functional sections – the latch and the flip-flop. The latch is responsible for retaining data, while the flip-flop triggers the latch in case of a positive-edge. The structure of the latch is similar to the multiplexers and de- multiplexers. Its input is comprised of two ports and a clock. The clock port contains the clock signal (CLK), the data port contains the input data, and the inverted port contains the inverse of the input data. The data port is fed to eight independent latches, each of which are opened and closed by a flip-flop.

The flip-flop is triggered by the rising edge of the clock signal, causing the current value of the data port to be stored in the latch. The output of the latch is available at the output port. The output from the output port is fed to the input data port, and the cycle continues until the desired data has been stored. As a result, the SN74LVC373AN is capable of amplifying a small signal and storing it for a longer period of time.

In summary, the SN74LVC373AN is a high-performance octal positive-edge triggered D-Type Flip-Flop IC in the Texas Instruments’ Low Voltage series. It is used in applications of latches, registers, counters, and synchronizers, as well as in converging control loops and feedback systems. The SN74LVC373AN is composed of two functional sections – the latch and the flip-flop, both of which are used for data retention and triggering respectively. With its fast clock speed, the SN74LVC373AN is perfect for any high motion control requirements or complex timing applications.

The specific data is subject to PDF, and the above content is for reference