SN74LVC573ADBRG4

Series:	74LVC
Packaging:	Tape & Reel (TR)
Part Status:	Active
Logic Type:	D-Type Transparent Latch
Circuit:	8:8
Output Type:	Tri-State
Voltage - Supply:	1.65 V ~ 3.6 V
Independent Circuits:	1
Delay Time - Propagation:	2ns
Current - Output High, Low:	24mA, 24mA
Operating Temperature:	-40°C ~ 85°C
Mounting Type:	Surface Mount
Package / Case:	20-SSOP (0.209", 5.30mm Width)
Supplier Device Package:	20-SSOP
Base Part Number:	74LVC573

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SN74LVC573ADBRG4 is a quad latch device from Texas Instruments, which belongs to the family of SN74LVC573ADBRG4 logic latches. This device is basically a storage device that stores the state of the input signal and enables the user to select when to change the state of the output signal. This article will discuss the application fields and working principle of SN74LVC573ADBRG4.The SN74LVC573ADBRG4 is a versatile logic device suitable for many different applications. It is capable of providing digital logic functions such as data storage, data transfer, digital timing, signal routing and clocking. As a latch, it is used in applications such as storage of data in digital patterns, holding temporary data, time delays and memory functions. The device features four independent inputs and four independent output latches, making it suitable for a wide range of applications.The SN74LVC573ADBRG4 uses asynchronous inputs and outputs, meaning it does not require any internal clock signal. This makes the device easier to use since there is no need to synchronize the input and output signals. The device also has a low power consumption, making it suitable for battery-powered applications.The SN74LVC573ADBRG4 has two modes of operation: Latch and Combinatorial. In the latch mode, the output of the device is updated only when the user enables the latch by pulling the latch enable pin high. The Combinatorial mode is a more sophisticated mode, where the outputs are updated on the rising edge of the Clock input, regardless of the latch enable pin.In terms of its working principle, the SN74LVC573ADBRG4 works like this: when the user pulls the latch enable input high, the outputs of the latches change to reflect the current level of the inputs. The outputs remain in the same state until the latch enable pin is low again, or until the Clock input changes. In the Combinatorial mode, the output changes whenever the Clock input changes, regardless of the state of the latch enable pin.The SN74LVC573ADBRG4 is used in a wide range of applications, such as digital data processing, signal/image processing, automotive systems, consumer electronics and many more. In these applications, the device provides a reliable, easy-to-use solution for signal control, data storage and signal routing functions.In conclusion, the SN74LVC573ADBRG4 is a versatile logic device from Texas Instruments, providing reliable signal control and data storage functions. This device is suitable for a wide range of applications, from digital data processing to consumer electronics. Its asynchronous inputs and outputs, coupled with its low power consumption, make it a great choice for battery-powered applications. By understanding the device\'s application fields and working principle, one can gain a better understanding of how to use the device for different applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description