SN74LVCC4245APWRE4

Input Signal:	--
Base Part Number:	74LVCC4245
Supplier Device Package:	24-TSSOP
Package / Case:	24-TSSOP (0.173", 4.40mm Width)
Mounting Type:	Surface Mount
Features:	--
Operating Temperature:	-40°C ~ 85°C (TA)
Data Rate:	--
Output Type:	Tri-State, Non-Inverted
Output Signal:	--
Series:	74LVCC
Voltage - VCCB:	2.7V ~ 5.5V
Voltage - VCCA:	4.5V ~ 5.5V
Channels per Circuit:	8
Number of Circuits:	1
Channel Type:	Bidirectional
Translator Type:	Voltage Level
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74LVCC4245APWRE4 is an integrated circuit belonging to the category of logic translators, level shifters. This logic device is manufactured by Texas Instruments and has the ability to transfer logic signals between the TTL and CMOS families of integrated circuits depending on the voltage level of the input signals. This device can transfer signals at various different voltages up to 5.5V and is also compatible with 3.3V as well as 5V levels for input and output voltages. The SN74LVCC4245APWRE4 is a dual-logic translator with two quad-level translators integrated into one package. Each individual quad translator has two input ports and two output ports. Usually, the input ports can accept either inputs from the lower voltage range (3.3V or 5V) or inputs from the higher voltage range (5.5V). The output ports too can be configured to output different logic levels depending upon the input voltages. The device is designed with 2-bit fully synchronous logic translation architecture and is widely preferred because of its low power consumption and high switching speed. This device contains up to four non-inverting buffers, which can be clocked by an external source in order to increase the switching speed. The non-inverting buffers have a select terminal which can be used to enable or disable the output. The buffer also includes a set of selection pins that allow the input to be augmented by a second input in order to increase the logic levels supported. The SN74LVCC4245APWRE4 translator is mainly used to interface between the TTL and CMOS logic families. It can be used to translate from higher logic levels to lower logic levels, as well as vice versa. The device excels with its high switching speeds and low power consumption making it an ideal choice for use in embedded and industrial applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description