SN74LVTH273MNSREP Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Flip flops are one of the most important components of logic systems. They are used to store binary data, acting as single bit memory devices. They are also used to sequence and synchronize digital circuits, eliminating metastability issues. The SN74LVTH273MNSREP is a flip flop which is designed for low voltage and low power operation. It also boasts faster switching speeds at a lower cost than other flip flops available in the market.

The SN74LVTH273MNSREP logic flip flop is a dual D type flip flop which is designed for 3.3V and 2.5V operation. It is designed for low power operation and high speed switching over traditional flipflop designs. It is constructed from one logic gate per output, which is connected to both of the flip flop inputs and the control input. This allows the outputs to be set and reset independently of each other, minimizing total switch time.

The SN74LVTH273MNSREP has two data inputs, two data outputs, two clock inputs and two control inputs. The data inputs are used to store binary data in the flip flop. The data outputs are used to output the stored data after power is applied. The clock inputs are used to control when the data is stored and output. The control input is used to control whether the inputs and outputs are enabled. It also controls the polarity of the data.

The SN74LVTH273MNSREP logic flipflop is used in 3.3V and 2.5V logic applications such as microprocessors, memory cards and other consumer electronics. It is also often used in automotive and industrial applications as it does not suffer from electrostatic damage. Due to its lower power and faster switching speeds, it is the preferred choice for applications where high speed is needed, such as in datacom applications. Its lower cost also makes it a desirable choice for many applications.

The working principle of the SN74LVTH273MNSREP is based on the positive edge triggered D flipflop. The data input at D-input is clocked in at the clock signal’s rising edge. The data at the D-input is then stored in the core flipflop stage, which is accessible through the Q-output. As the Q output will always keep the last binary value stored until the signal changes on the clock’s rising edge the device can be used to store the signal.

In conclusion, the SN74LVTH273MNSREP is an ideal low voltage, low power flipflop design. It is designed for use with 3.3V and 2.5V applications, and is highly recommended for use in automotive and industrial applications due to its immunity to electrostatic discharge. It also features faster switching speeds, ensuring a reliable performance in high-speed applications.

The specific data is subject to PDF, and the above content is for reference