SN74LVTH574DWR Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74LVTH574DWR is a kind of flip-flop, which is a widely used logical circuit module in digital systems.

A flip-flop is essentially a data-holding circuit or a device that holds its last state or information until urged or triggered to switch again. In general, the flip-flop is used to store the state of a digital input. It is used to split an electronic signal into two parts and to store it for some duration of time. One such application of a flip-flop is for digital data storage, where it is used to store information for as long as the power is on.

The SN74LVTH574DWR is a Flip-Flop with a non-inverting input. It can be operated in two modes: Level sensitive and Edge-triggered. In Level-sensitive mode, the circuit’s output depends on the input levels, while in Edge-triggered mode, the circuit’s output is triggered or adjusted in response to input edges. Level-sensitive operation is not as common as Edge-triggered mode. The SN74LVTH574DWR Flip-Flop has a very low static power consumption of 2 mW at 2.5 V and is designed to operate over a wide temperature range of -40°C to 125°C. It has very fast propagation time of 10 ns along with a maximum tPD of 13 ns.

The SN74LVTH574DWR Flip-Flop provides both synchronous and asynchronous reset capabilities. The synchronous reset allows the user to reset the circuit by providing a low-level reset input signal. A low-level reset can be applied to the D input pin to reset the circuit. The asynchronous reset input, on the other hand, allows the user to reset the circuit with an active-high input. The SN74LVTH574DWR Flip-Flop also has a very low reset-power consumption of 2 μW and a reset-delay of 0.3 ns.

The SN74LVTH574DWR has a wide range of applications. It can be used in digital circuits, such as counters and registers, where it is used to store data. It can be used in communications systems, where it is used to store the data bits of a single transmission or multiple transmissions. It is also used in systems that require synchronized data transfer, such as bus protocol controllers, synchronous data receivers, clock dividers, and so forth. Additionally, it can be used in logic or arithmetic circuit design, where it can be employed as an agent to trigger a certain event or action when certain conditions are met.

To conclude, the SN74LVTH574DWR is a very versatile Flip-Flop component that can be used for a variety of operations and applications. Its low power consumption and wide temperature range make it ideal for both portable and stationary applications. It is a reliable component and can be used in both high and low-powered circuit designs. Additionally, it comes with both synchronous and asynchronous reset capabilities and can be used in synchronized data transfer.

The specific data is subject to PDF, and the above content is for reference