SN74S74D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic - Flip Flops is a type of data storage device that can store one bit of data. The SN74S74D is a dual D flip flop device which consists of two independent D-Type Data Latches. It is used for applications that require two independent latches, such as clock synchronizers, counters and frequency dividers.

The SN74S74D has two D-Type data latches, each with four individual logic pins. The Clock (C) pin is used to control data storage operations in the flip flop. Data is transferred internally from the input to the output of the flip flop whenever a rising edge (Change of the Clock waveform from low to high level) is detected on the clock pin. Data is clocked into the new output state at the same time that the clock pin changes state. The Clear (CLR) pin will force all outputs to the logic \'0\' state when the pin is taken low.

The SN74S74D can also be used as toggle flip-flops in binary counting applications. A toggle flip-flop is a mechanism that changes states when triggered. When the CLK signal is low, the output signals remain unchanged. When the CLK signal is high, the two outputs change states. The two outputs are complement of each other; if one output is \'high\', then the other will be \'low\' and vice versa. The Toggle (TG) pin is used when the SN74S74D is used as toggle flip-flops in binary counting applications. When the TG pin is taken high and the CLE pin is kept low, the toggle operation is activated.

The SN74S74D is used in a wide range of applications including memory elements, clock synchronizers, counters, and frequency dividers. The SN74S74D is an ideal choice for applications that require two independent latches and where a rising edge on the Clock pin is used to control data storage operations. The SN74S74D is also very useful as a toggle flip-flop and in binary counting applications.

The specific data is subject to PDF, and the above content is for reference