SP339BER1-L

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SP339BER1-L is a serial port converter IC device, belonging to the Interface - Drivers, Receivers, Transceivers category. It is designed to bridge the communications gap between various interface standards, converting one data format to another. This device is designed to support half-duplex, bidirectional communication between the host processor and peripheral devices.

In most applications, the device is used to convert digital logic signals from the host processor to UART logic from the exception device. It is most commonly used in high-speed, low-power systems such as hand-held computers and smart cards. The device requires minimal power, as it can operate on a single 2.7V to 3.6V supply.

In terms of its application field, the SP339BER1-L can be used in a variety of different miniature and portable devices. It can provide serial communication between a host processor and a variety of different peripheral devices, including sensors, displays, and other logic devices. It can also be used in applications requiring bidirectional communication. It is particularly useful in smart cards and microcontrollers, as these devices restrict available power and space.

The SP339BER1-L device operates using a simple working principle. Two signal pins, a transmit pin and a receive pin, are used for communicating. The device takes in digital logic signals from the host processor and converts them to UART logic, which can be understood by the peripheral device. The transmit pin remains high until data is sent, at which point the logic is reversed. Similarly, the receive pin will remain high until data is received from the peripheral device, at which point the logic is reversed again.

The device can support a wide range of logic levels, ranging from 2.7V to 3.6V. It also supports a wide range of data formats and speeds. In most applications, it is able to support data rates up to 2 Mbps. Furthermore, it can also support manual control signals, if necessary.

In short, the SP339BER1-L is a useful serial port converter IC device, offering an easy and cost-effective way to bridge the gap between various interface standards. It is particularly suited to power- and space-constrained applications, such as smart cards and microcontrollers. Simple to use and understand, it can be used to support a variety of different data rates and formats, with minimal power requirements. It is a great choice for any application requiring fast and reliable conversion between different data formats.

The specific data is subject to PDF, and the above content is for reference