SPD242401C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SPD242401C is an alternating current (AC) to direct current (DC) converter made by Kolbi Electronics. This device is used to convert AC power into DC power for use in a variety of applications, from consumer and industrial electronics to medical accessories and instrumentation. SPD242401C devices are capable of both single-phase and three-phase AC inputs, as well as a range of output voltage levels and current ratings.

The SPD242401C is based on a full-bridge topology, which uses four switching elements (two transistors and two diodes) to convert AC power into DC power. In single-phase input configurations, the four switching elements are connected to the a, b, c, and d terminals. When the ac input is applied, two transistors (a and b) and two diodes (c and d) alternately turn off and on, allowing the AC current to flow alternately through the two transistors and two diodes, and the transformer core. This process is known as "rectification" - the conversion of AC power to DC power.

The output voltage of the SPD242401C is determined by the turns ratio of the transformer and the frequency of the ac input. The turns ratio determines the ratio between the number of turns in the primary (source) winding to the number of turns in the secondary (load) winding. The transformer core also includes two additional windings - the "Sensing" and "Feedback" windings - which provide feedback to the integrated circuit in the converter to regulate the output voltage by controlling the on/off time of the transistors and diodes.

The SPD242401C is designed to operate at a wide range of input voltages, from 90 Vac to 250 Vac. It also operates at a range of frequencies, from 47 Hz to 65 Hz, depending on the input voltage. The output voltage range is adjustable from 20 Vdc to 24 Vdc, and the output current is adjustable from 10 A to 24 A maximum. The SPD242401C also features built-in short-circuit and overload protection, as well as a number of additional features to provide reliable power conversion.

The SPD242401C is an AC to DC converter that is ideal for a wide range of applications, including medical equipment, instrumentation, consumer electronics, and industrial automation. It’s full-bridge topology, adjustable output, and built-in protection features make it an ideal choice for applications that require reliable power conversion.

The specific data is subject to PDF, and the above content is for reference