SQM10SJB-0R22

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are electronic components mainly used to regulate and limit current in circuits. The SQM10SJB-0R22 is a widely used through hole resistor that is perfect for a range of applications such as heating, sensing, and current control. This section looks at the general application field and working principle of the SQM10SJB-0R22.

The SQM10SJB-0R22 is typically used in the power fields including induction heating, power electronics, and electrical engineering. This resistor is capable of handling various kinds of currents from low to moderate to high. Because of its durability and simplicity, they can be found in an array of applications, such as automotive electronics, office equipment, and consumer electronics.

The SQM10SJB-0R22 has a power rating of up to 50 watts and a maximum operating temperature of between –55 to +150°C. The resistance range of this resistor is from 0.1Ω to 3KΩ. The resistor is constructed using a metal oxide film that is coated with epoxy resin, resulting in better heat dissipation properties. The metal oxide film is also present on its bottom and sides, providing additional protection from physical damage.

The operating principle of the SQM10SJB-0R22 can be summarized in three steps: Firstly, electrical current is applied to the resistor. This causes the metal oxide film to heat up, thus generating a voltage drop across the resistor. Secondly, this voltage drop produces a certain resistance within the resistor due to its resistance value at a given temperature. Lastly, this resistance limits the current passing through the resistor.

In conclusion, the SQM10SJB-0R22 is a through hole resistor with a wide range of applications. The resistor is constructed using a metal oxide film, allowing it to handle different current levels. Its maximum operating temperature is –55 to +150°C, and its resistance range is from 0.1Ω to 3KΩ. The operating principle of the SQM10SJB-0R22 is the ability to generate voltage drop due to the metal oxide film, thus limiting current passing through the resistor.

The specific data is subject to PDF, and the above content is for reference