SQM10SJB-39K

Series:	SQM
Packaging:	Bulk
Part Status:	Active
Resistance:	39 kOhms
Tolerance:	±5%
Power (Watts):	10W
Composition:	Ceramic
Features:	Anti-Arc, Flame Proof, Moisture Resistant, Safety
Temperature Coefficient:	±300ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Radial
Supplier Device Package:	Radial Lead
Size / Dimension:	0.630" L x 0.472" W (16.00mm x 12.00mm)
Height - Seated (Max):	1.437" (36.50mm)
Number of Terminations:	2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole ResistorsThrough hole Resistors are a type of electrical components that are used when a circuit requires a higher degree of resistance than the more common SMT resistors can provide. The resistance of these devices is much higher than those of their surface mount (SMT) counterparts, which typically have a resistance range from 1Ω to 10KΩ. Through hole resistors have a much wider range of resistance values, which can range anywhere from 1 OHM to 10M OHMs, allowing them to be used for a much wider range of applications.The SQM10SJB-39K is a devices characterized by excellent resistance values and temperature coefficients with a low tolerance of 0.2%. It is a high-value, wide-range through hole resistor with a range of resistance from 10KΩ to 9MΩ and an operating temperature range from -55° C to +125° C.The SQM10SJB-39K is suitable for high-voltage, high-current applications such as power breakers, trucks, AC adapters, motor drives, power supplies and instrumentation. It is also ideal for use in applications that require high accuracy and reliability such as sensor circuits, current measurement and control, and voltage monitoring.The working principle of the SQM10SJB-39K is based on the flow of current in a conductor formed by a combination of resistors in series and/or in parallel. As current passes through the resistor, it comes into contact with the resistive material and generates a potential difference (voltage) across the resistor. The amount of current that flows through the resistor is determined by the amount of resistance it offers. When the amount of current is less than the amount of resistance, the potential difference will be less than the full voltage of the power source.The SQM10SJB-39K consists of two basic components, the resistor and the circuit board. The resistor is composed of a resistive material, such as a metal or alloy, a wire, and a printed circuit board. The circuit board contains the wiring and necessary connections to allow current to flow through the resistor.In order to increase the reliability of the SQM10SJB-39K, a unique construction technique is employed. This process involves the use of a substrate, which is a special metal sheet or ceramic material that is used to provide the shape of the resistor. The substrate also acts as an insulator to protect the resistive material from overloads and short circuits.The SQM10SJB-39K is designed for use in high-power applications and provides excellent protection against overvoltage and overcurrent conditions. It has a high temperature coefficient of resistance, lower power dissipation, and excellent stability. Additionally, its high-voltage and current ratings make it ideal for use in any application where reliable and accurate performance is required.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description