SQM500JB-0R33

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors, in general, are resistors that are installed or fit through a hole in a printed circuit board (PCB), making electrical and/or mechanical connections. The familiar SQM500JB-0R33 is among the array of Through Hole Resistors, and a typical end-user of this product is likely to be unaware of its application field and working principle.

The SQM500JB-0R33 when employed as a Through Hole Resistor, is a precision metal-film resistor which ensures a tighter precision tolerance and a better temperature coefficient. It is designed for working in temperatures ranging from -55°C to +125°C. It consists of a resistor stepped down to the reference substrate and a wire-wound ceramic base. This construction feature gives the SQM500JB-0R33 exceptional thermal stability and controlled temperature coefficient. The substrate is encased by glass-filled thermoplastic casing which is physically stable and exhibits low thermal expansion. For the output load, it usually connected with a printed circuit board (PCB) through the hole in the substrate.

In simple terms, the SQM500JB-0R33 works by reducing the voltage applied across its terminals. Applied in the form of an alternating current (AC), the voltage is dropped and converted to a lower value known as the direct current (DC). The reduction in voltage is enabled by the resistance which is found either between two terminals or within a single resistor. Due to its application field as a precision metal-film resistor and its feature of having a tight precision tolerance and better temperature coefficient, the SQM500JB-0R33 is able to operate at a reduced voltage range while still ensuring minimum power consumption.

As a power component, the SQM500JB-0R33 must be correctly used in order to maximize its functional efficiency. It is designed to be installed as a Through Hole Resistor, and should have ade referable gap designed into the Printed Circuit Board (PCB) while it is constructed. The gap ensures that the distance to the components on the board does not exceed the rated gap and inductance requirement.

In conclusion, the SQM500JB-0R33 is an example of a Through Hole Resistor. It has a tight precision tolerance and better temperature coefficient due to its precision metal-film resistor construction. It can be installed in a PCB with a gap that follows the inductance requirements. When used properly, it can reduce voltage while still ensuring a low power consumption.

The specific data is subject to PDF, and the above content is for reference