SQP300JB-2R7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SQP300JB-2R7 through hole resistors are electronic components used to limit current in electrical circuits. Through hole resistors are, as the name implies, resistors that have been mechanically and electrically attached to a substrate usually through drilled holes on the substrate. As a general rule of thumb, the through hole resistors have a lower electrical resistance than the surface mount resistors. The lower resistance of the through hole resistors enables them to deliver a higher power rating than the surface mount resistors.

Applications for SQP300JB-2R7 through hole resistors include but are not limited to: DC supplies, active filters, voltage-controlled switch (VCS), high voltage protection devices, snubber circuits, and ultra-fast switching devices. Additionally, through hole resistors are used as a current limiting device in DC battery applications and in a number of other industrial applications. Via through hole technology, these resistors can be mounted onto most substrates, providing protection for the component from physical and electrical stresses.

The working principle of SQP300JB-2R7 through hole resistors is based on the fact that the current this type of resistor can conduct is directly proportional to the voltage applied across the resistor. In other words, for a given amount of voltage, the current is the same no matter what the value of the resistor is. This is useful in cases where current needs to be limited, as the voltage can be manipulated to adjust the current to the desired level.

The construction of SQP300JB-2R7 through hole resistors is comprised of a conduction element made out of high grade sponge or ceramic material. The sufficient length of the conduction element is highly dependent on the resistance value required for the component and can vary in size from a few millimeters to a few dozen millimeters. In the past, conductive elements were made of carbon film, however those are no longer manufactured.

The substrate of SQP300JB-2R7 through hole resistors is also composed of high-grade material and usually involves a ceramic construction. This is due to the need of the resistor to have high electrical insulation between the conduction element and the substrate, therefore preventing an electrical short. The substrate of these components is prepared with several layers of ceramic material in order to provide the necessary mechanical and electrical properties.

The resistors are further attached to the substrate through the use of soldering technology. On the substrate, electrical connections are made to the conduction element and to the lead out pins. The pins are usually plated with gold or silver, and the metal and the alloy used in the soldering process is usually unique to each component in order to achieve the required mechanical solidity. Ultimately, the attachment of the component to the substrate is a highly emphasized and carefully controlled operation to ensure the longevity and performances of the component.

SQP300JB-2R7 through hole resistors are applied in a variety of electronic circuits both as a current limiting device and as a voltage regulation unit. They are well-suited when strong current limiting and voltage regulation characteristics are needed, and are one of the most reliable and durable components used in the production and assembly of electronic devices. With a combination of mechanical and electrical properties that enable them to perform over a wide temperature range, these components are ideal for any application requiring an efficient and reliable current limiting and voltage regulation solution.

The specific data is subject to PDF, and the above content is for reference