SQP30AJB-15K

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are components that are designed to have a predictable and repeatable resistance regardless of power. They are used as an electrical resistor to limit current flow, to divide voltage, to adjust signal levels, and for many other purposes. The SQP30AJB-15K is a type of through hole resistor that has an architecture and working principle that is derived from the classical design of resistors.

These resistors are made from a thermal conductive material such as aluminum or copper which are poured into a blank and then allowed to cool. This creates a pad with a high thermal conductivity capable of resisting high temperatures. The resistive material is then split into two halves along a longitudinal axis and wrapped in an insulative coating. The insulation then helps to protect the entire length of the resistor from heat or voltage fluctuation. Another key feature of the design is the ability to embed resistive materials in the substrate with a large contact area.

The SQP30AJB-15K not only has a noteworthy design but also an effectual working principle. It works by limiting current in an electrical circuit in the form of a voltage divider. This is done when the resistor is connected between two nodes of the circuity and there is a potential difference between the two nodes. As current passes through the resistor, a voltage drop is produced as a result of the reistance. Thus, the higher the resistance value of the resistor, the greater the voltage drop and resulting current limitation.

In addition, the resistor is equipped with a safety feature which ensures that the device will not fail by preventing its temperature from exceeding a predetermined level. If the temperature gets too high, the device will shut down to protect itself. This is particularly important if the resistor is used in a circuit that is subject to extremes in temperature or voltage.

One application for the SQP30AJB-15K is as a thermal conductive material for high powered applications. The device can be used to dissipate heat away from components that are susceptible to overheating. It can also be used in systems that require an adjustable resistance to control the flow of current through the circuit. It is also suitable for use in electronic devices such as mobile phones or laptop computers as it offers greater efficiency.

In conclusion, the SQP30AJB-15K is a through hole resistor that is primarily used to dissipate heat, limit currents and divide voltage in electrical circuits. It works by using a resistive material embedded with a high thermal conductivity and insulation layer. This provides an efficient and adjustable resistance to control the flow of current through the circuit. Additionally, the device has a safety feature that will prevent its temperature form exceeding a predetermined limit. The SQP30AJB-15K is used widely as a thermal conductive material in high powered applications as well as electronic systems.

The specific data is subject to PDF, and the above content is for reference