SR306HR0G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SR306HR0G is a type of diode-rectifier, also known as a single-phase rectifier. It is a three-terminal device that can be used to convert alternating current (AC) to direct current (DC). The rectifier is supplied in a variety of packages, including the hermetically sealed UHF contacts, bare tabs or through-hole devices. The main application areas for these devices include the telecoms, industrial and computer markets.

Functionality and Features

SR306HR0G has three terminals: anode, cathode, and gate. The anode, typically labeled "A", is the positive terminal, the cathode, typically labeled "C", is the negative terminal, and the gate, typically labeled "G", is the control terminal. The device can be used in either blocking or conducting modes, described further in the explanation of operation.

The SR306HR0G rectifier can handle currents up to 4.5A and has a blocking voltage of up to 600V. It is a fast reacting device which can switch between on and off states in nanoseconds. The device is also highly temperature-resistant, with a thermal resistance of 0.55 degree Celsius per watt. In addition, the device has low forward voltage drop and very low leakage current.

Operation and Working Principle

SR306HR0G operates as a three-terminal device, with the anode positive, the cathode negative, and the gate and control terminal. The SR306HR0G can be used in either blocking or conducting modes. In blocking mode, the device acts as an open switch, allowing no current flow between the anode and cathode. In conducting mode, the device acts as a closed switch, allowing current to flow from the anode to the cathode.

In order to switch into the conducting mode, a positive gate signal must be applied. This causes the switch to close and allow current to flow between the two terminals. When the gate signal drops below the required threshold, the switch will open again, blocking the flow of current. The device is designed to maintain its switch states in the event of power fluctuations.

Final Thoughts

SR306HR0G is a three-terminal device that can be used to convert AC to DC. It can handle currents up to 4.5A, has a blocking voltage of up to 600V, is fast reacting and highly temperature-resistant. The device is designed to operate in either blocking or conducting modes, with a positive gate signal being applied to cause the switch to move from open to closed. It has low forward voltage drop, very low leakage current and is specifically designed to maintain switch states in the event of power fluctuations.

The specific data is subject to PDF, and the above content is for reference