SS10P3C-M3/86A

Series:	eSMP®
Packaging:	Tape & Reel (TR)
Part Status:	Active
Diode Configuration:	1 Pair Common Cathode
Diode Type:	Schottky
Voltage - DC Reverse (Vr) (Max):	30V
Current - Average Rectified (Io) (per Diode):	5A
Voltage - Forward (Vf) (Max) @ If:	530mV @ 5A
Speed:	Fast Recovery = 200mA (Io)
Current - Reverse Leakage @ Vr:	550µA @ 30V
Operating Temperature - Junction:	-55°C ~ 150°C
Mounting Type:	Surface Mount
Package / Case:	TO-277, 3-PowerDFN
Supplier Device Package:	TO-277A (SMPC)
Base Part Number:	SS10P3C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The SS10P3C-M3/86A is a diode rectifier array device. It consists of two series connected Thyristor/SCR and four diodes connected in parallel. This device is designed to replace expensive discrete diode/thyristor combinations in an otherwise expensive and bulky power supply assembly. This device is capable of providing higher switching power and efficiency than conventional discretes. This article will discuss the application field and working principle of the SS10P3C-M3/86A.

Application Field

The SS10P3C-M3/86A is used in applications where higher levels of power and efficiency are required. This device is suitable for applications such as motor drives, welding power supplies, UPS systems, converters, and other power conversion devices. Due to its low on-state voltage drop, high efficiency, and low voltage switching capabilities, the SS10P3C-M3/86A is an ideal device for switching applications at high input voltages.

Working Principle

The SS10P3C-M3/86A is designed to provide a high degree of power switching, protection, and regulation. It consists of two series connected Thyristor/SCR and four diodes connected in parallel. The two SCR devices are used to control the current and the four diodes provide protection against overcurrent, overvoltage, and reverse voltage.When a positive voltage is applied to the gate of the SCR, it conducts. The current passing through the device increases until it reaches the hold current and the SCR remains in on-state. The current continues until the voltage across the SCR reaches its breakdown voltage, at which point the SCR switches off and the current flow is interrupted.The four diodes are used to protect the SCRs from overvoltage and reverse voltage. The overvoltage protection diode prevents the SCR from turning on when a voltage higher than its rating is applied. Reverse voltage protection diode prevents current to flow in the opposite direction.

Conclusion

The SS10P3C-M3/86A is a diode rectifier array device, designed to provide higher levels of power and efficiency than conventional discretes. It consists of two series connected Thyristor/SCR and four diodes connected in parallel. This device is suitable for applications such as motor drives, welding power supplies, UPS systems, converters, and other power conversion devices. The four diodes provide overvoltage and reverse voltage protection, while the two SCRs control the current.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description