SS1H9-E3/5AT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are one of the most common and widely used electronic components. They are devices primarily used for controlling the flow of electricity in a circuit and can be used for converting AC to DC, changing the voltage level, protecting components from overvoltages, and many more applications. Among diodes, rectifier diodes are the most commonly used type, and they are usually applied in AC to DC rectification circuits. Single rectifier diodes are used in smaller circuits with acoustic or vibrational signals, instrumentation, and batteries.

The SS1H9-E3/5AT is a single rectifier diode with an average forward current of 0.5 amps and is rated with a power dissipation of 1 watt. The SS1H9-E3/5AT has a low forward voltage drop of 0.35 volts and a forward surge current of 5.0 amps, making it suitable for use in low voltage and high-powered applications. The diode also features a soft reverse recovery time of 1.5 microseconds and a high peak repetitive peak reverse voltage of 100 volts.

The SS1H9-E3/5AT has many uses and applications in electronic circuits. It is often used in audio and instrument amplifiers, which require a reliable, low-voltage operation. The SS1H9-E3/5AT is used in power supplies and motor drives to convert AC to DC and regulate the voltage levels. The diode also helps in protecting components from voltage fluctuations and overvoltages. The SS1H9-E3/5AT is also suitable for use in direct current (DC) to alternating current (AC) circuits, battery charging, cellphone circuits and signal routers.

The working principle of the SS1H9-E3/5AT is simple and straightforward. The diode works by allowing the current to flow in only one direction, from anode to cathode. The current that flows from the anode to the cathode is referred to as the forward current, while the current that flows from the cathode to the anode is called the reverse current. The diode will pass the forward current through the diode and block the reverse current. The voltage drop across the diode is an important parameter while operating the diode, and this is determined by the current that flows through the diode. As the current increases, the voltage drop across the diode decreases.

To sum it up, the SS1H9-E3/5AT is a single rectifier diode with a low forward voltage drop and a short reverse recovery time. Its primary applications include audio and instrument amplifiers, power supplies, motor drives and DC to AC conversion. The working principle of this diode is the preferential conduction of the current from anode to cathode and the blocking of the reverse current, and the voltage drop across the diode depends on the flow of current.

The specific data is subject to PDF, and the above content is for reference