SS23MHRSG

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Diode Type:	Schottky
Voltage - DC Reverse (Vr) (Max):	30V
Current - Average Rectified (Io):	2A
Voltage - Forward (Vf) (Max) @ If:	600mV @ 2A
Speed:	Fast Recovery = 200mA (Io)
Current - Reverse Leakage @ Vr:	150µA @ 30V
Capacitance @ Vr, F:	35pF @ 4V, 1MHz
Mounting Type:	Surface Mount
Package / Case:	2-SMD, Flat Lead
Supplier Device Package:	Micro SMA
Operating Temperature - Junction:	-55°C ~ 150°C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The SS23MHRSG is a single diode rectifier that is used in a wide variety of applications. It is a fast-recovery rectifier, which is used in circuits to provide voltage regulation and power supply smoothing, and to serve as a semiconductor switch for high speed digital circuits. The SS23MHRSG has a maximum forward average current of 30A with a non-repetitive peak forward surge current rating of 75A. In addition, it can handle voltages up to 80 V, providing excellent surge holdup capability and high frequency performance.

Applications

The SS23MHRSG is mainly used to dissipate power in various applications, while simultaneously providing voltage and current regulation. It is typically used in communications systems, computers, and automotive electronics. It is also used in rectification applications where high current, fast switching, low noise and/or high surge capability are required.In communications systems, the SS23MHRSG is used as a high speed switching device in DSL and fiber optic communications. It can serve to condition incoming signals, remove unwanted signals, and switch between different signal paths.The SS23MHRSG can also be used in computers and automotive electronics applications, where it is used as a power management and switch-mode regulator. It can provide efficient power leveling and reduce noise and ripple, while switching between various operating voltages.

Working Principle

The SS23MHRSG utilizes the rectification principle to convert AC voltage into DC voltage. This is accomplished by using two diodes, which are placed in series but in opposite directions. When a voltage is supplied, one of the diodes, the one with the anode connected to the positive side of the supply, will be conducting, while the other diode, with the anode connected to the negative side of the supply, will be blocked. This process, known as rectification, results in a unidirectional current, from the positive side of the supply to the negative side.The SS23MHRSG also utilizes a fast-recovery process to reduce the losses that typically occur in the rectification process. This process reduces the amount of time between the start and end of each rectification cycle, resulting in a more efficient conversion of AC current to DC current.

Conclusion

The SS23MHRSG is a single diode rectifier that is used in a wide variety of applications. It is a fast-recovery rectifier, which is used in circuits to provide voltage regulation and power supply smoothing, and to serve as a semiconductor switch for high speed digital circuits. The main application of the SS23MHRSG is in the rectification of AC current to DC current, using a two diode system in series that is connected in opposite directions. In addition, it utilizes a fast-recovery process to reduce losses that typically occur in the rectification process.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description